The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Azden Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. does this work with the Canon ST-E3-RT?

A: The Phottix Laso TTL Flash Trigger Receiver for Canon B&H # PH89091 can be placed at the bottom of this flash so that the Canon ST-E3-RT can fire it.

Q: 2. Are the YN622N-TX and and the newer YN622N II transceivers compatible?

A: I don't see why they wouldn't be. However, I only own the YN622N TX (which I use with the YN685 via this awesome B&H bundle).

Q: 3. When using the Sony A7RII camera, will this transmitter allow for full control over the Sony HVL-F60M flash when paired the Godox X1R-S TTL Wireless Flash Trigger Receiver, or will it only trigger the flash via radio frequency, leaving it up to the photographer to dial in power manually for each Sony flash?

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras B&H # GOXPROS will allow both control over the flash output and wireless triggering of a Sony HVL-F60M flash attached to a Godox X1R-S Receiver.

Q: 4. Is this comparable with the Sony A7rii ? Will this work with the radio transmitter that comes with the bare bulb bolt ?

A: This flash has the Multi-Interface Shoe, which makes it compatible with the Sony A7R II. It will not be compatible with the dedicated radio trigger for the Bolt bare bulb flashes like the VB22.

Q: 5. Will this set work with the Sony A7R2 and the flash mecablitz 52AF-1?

A: Unfortunately the metal foot is not compatible with the Sony Multi Interface shoe.

Q: 6. Greetings, just received a new Bolt VS-570N, I'm noticing there are options for additional power supplies, PC sync and Firmware upgrade. Where does one get a cable for such or are there three different cables. Thanks... Kevin

A: There are 3 different cable connections for 3 different purposes. The power supply allows you to connect a battery pack, allowing you to shoot for longer periods of time without running out of battery, and also gives you a faster recycling time from one shot to another. Check out this battery pack as an example: B&H # BOPP310. The PC sync cord connects from the camera to the flash, (assuming your camera has a PC sync) allowing you to take the flash off the camera. Here is a cable from Impact: B&H # IMPCMPCM6 If your camera does not have a PC sync, you can purchase a flash cable from Vello that allows you to do the same thing. B&H # VEOCSN3Finally, the Firmware upgrade is a USB cable that allows you to connect the flash to the computer for firmware updates that Bolt releases.

Q: 7. Is this compatible with the Godox AD200?

A: Yes it is, I use it with my X-T2 together with two AD600.

Q: 8. The zoom range is given as 24-105. Is it still effective to use for super telephoto (150-600)?

A: Just put it on 105mm and use the Guide number for that Your Telephoto lens will have a narrower field of view than the flash, so the subject will be covered up to the distance specified by the guide number.

Q: 9. Will this work with two Godox mono lights and a camera without a hotshoe? I recent got a second Godox mono light and want to use both lights with my large format camera, previously I just used the cable that came with the Godox mono light and connected one end to the light and the other end to the port on my Large Format camera but to use both lights simultaneously I need a remote trigger and receiver, trying to see if this one would work...

A: The receivers in this kit can connect to each Godox monolight. The transmitter can connect to your large format lens via the sync terminal using the Impact Miniphone Male (3.5mm) to PC Male Sync Cord (18"), BH # IM10032390. http://bhpho.to/3aTU8Vg

Q: 10. Is it compatible with Nissin di622?

A: While this trigger could work with the Nissin Di622, it has not been tested to our knowledge. Your results may vary.