The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 6-pin Hirose Connector for Samson Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will it work with the Godox X1R-S receiver?

A: Yes, it will work with the X1R-S.

Q: 2. Greetings, just received a new Bolt VS-570N, I'm noticing there are options for additional power supplies, PC sync and Firmware upgrade. Where does one get a cable for such or are there three different cables. Thanks... Kevin

A: There are 3 different cable connections for 3 different purposes. The power supply allows you to connect a battery pack, allowing you to shoot for longer periods of time without running out of battery, and also gives you a faster recycling time from one shot to another. Check out this battery pack as an example: B&H # BOPP310. The PC sync cord connects from the camera to the flash, (assuming your camera has a PC sync) allowing you to take the flash off the camera. Here is a cable from Impact: B&H # IMPCMPCM6 If your camera does not have a PC sync, you can purchase a flash cable from Vello that allows you to do the same thing. B&H # VEOCSN3Finally, the Firmware upgrade is a USB cable that allows you to connect the flash to the computer for firmware updates that Bolt releases.

Q: 3. Is this comparable with the Sony A7rii ? Will this work with the radio transmitter that comes with the bare bulb bolt ?

A: This flash has the Multi-Interface Shoe, which makes it compatible with the Sony A7R II. It will not be compatible with the dedicated radio trigger for the Bolt bare bulb flashes like the VB22.

Q: 4. Will this work on a Sony A7III aka Sony ILCE-7m3 provided that you use Godox compatible equipment?

A: Yes it will work with Sony A7III and most Godox lights

Q: 5. Hi recently I bought a flash kit bowens gemini 400r...is it compatible with xpro?

A: No.

Q: 6. I have a GH5 and am planning on buying Godox SK400II. Is this trigger compatible?

A: Yes they are compatible.

Q: 7. can this work control the GODOX SK300II MONOLIGHT?

A: Yes, it would be perfect for triggering and controlling the settings of the Godox SK300II.

Q: 8. Work with Samsung NX 30 ?

A: I DO NOT KNOW ANYTHING ABOUT THE SAMSUNG NX 30. I PURCHASED THE KIT TO USE ON SONY A6000. IT WORKS BETTER THAN I HAD HOPED. I CAN MOUNT THE TRIGGER ON THE A6000 AND TRIGGER A NIKON SB700 WITH NO PROBLEMS. I USE THE SB700, BECAUSE IT WILL NOT WORK WITH SOME SONY EXTERNAL FLASHES. I HOPE THIS HELPS.

Q: 9. where can I get an owners manual?

A: I googled and found this site: https://fccid.io/pdf.php?id=2943363 That's the manual I have in paper - so it's identical

Q: 10. When using the Sony A7RII camera, will this transmitter allow for full control over the Sony HVL-F60M flash when paired the Godox X1R-S TTL Wireless Flash Trigger Receiver, or will it only trigger the flash via radio frequency, leaving it up to the photographer to dial in power manually for each Sony flash?

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras B&H # GOXPROS will allow both control over the flash output and wireless triggering of a Sony HVL-F60M flash attached to a Godox X1R-S Receiver.