The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Azden Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I have a GH5 and am planning on buying Godox SK400II. Is this trigger compatible?

A: Yes they are compatible.

Q: 2. where can I get an owners manual?

A: I googled and found this site: https://fccid.io/pdf.php?id=2943363 That's the manual I have in paper - so it's identical

Q: 3. I have an Flashpoint R2 trigger that controls my AD200 but I can’t go past 1/128th with it on my AD400 Pro will this new trigger do that?

A: This will work well with Godox AD200 and AD400 HSS and TTl

Q: 4. Will this work with two Godox mono lights and a camera without a hotshoe? I recent got a second Godox mono light and want to use both lights with my large format camera, previously I just used the cable that came with the Godox mono light and connected one end to the light and the other end to the port on my Large Format camera but to use both lights simultaneously I need a remote trigger and receiver, trying to see if this one would work...

A: The receivers in this kit can connect to each Godox monolight. The transmitter can connect to your large format lens via the sync terminal using the Impact Miniphone Male (3.5mm) to PC Male Sync Cord (18"), BH # IM10032390. http://bhpho.to/3aTU8Vg

Q: 5. Use two cameras

A: No, Camera per unit.

Q: 6. Is it compatible with Nissin di622?

A: While this trigger could work with the Nissin Di622, it has not been tested to our knowledge. Your results may vary.

Q: 7. I am planning on buying the canon EOS R. 1st question will this work on that body? 2nd question I currently have a 580exii and two 430 speed lights. Will this remote trigger without any additional equipment? Thanks.

A: Yes , it will work with the EOS R , you will need receivers for both flashes # GOX1RC

Q: 8. Will this work for the Olympus FL900 and FL600 flashes ???? Jim

A: Unfortunately, Godox does not have an Olympus receiver to provide full program modes. If You used this Godox Nikon receiver, it would only allow Your flash to be activated. Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon B&H # GOX1RN MFR # X1R-N

Q: 9. Will this still trigger if used on a Fuji (not concerned with ttl)

A: The Canon version if used in manual mode while on a Fuji should work. No TTL and No HSS available.

Q: 10. Is this comparable with the Sony A7rii ? Will this work with the radio transmitter that comes with the bare bulb bolt ?

A: This flash has the Multi-Interface Shoe, which makes it compatible with the Sony A7R II. It will not be compatible with the dedicated radio trigger for the Bolt bare bulb flashes like the VB22.