The cocoa Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm locking Connector for Azden Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Work with Samsung NX 30 ?

A: I DO NOT KNOW ANYTHING ABOUT THE SAMSUNG NX 30. I PURCHASED THE KIT TO USE ON SONY A6000. IT WORKS BETTER THAN I HAD HOPED. I CAN MOUNT THE TRIGGER ON THE A6000 AND TRIGGER A NIKON SB700 WITH NO PROBLEMS. I USE THE SB700, BECAUSE IT WILL NOT WORK WITH SOME SONY EXTERNAL FLASHES. I HOPE THIS HELPS.

Q: 2. Will this work with the Fuji GFX 100?

A: Yes, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras would be compatible for use with the FUJIFILM GFX 100 Medium Format Mirrorless Camera.

Q: 3. Use two cameras

A: No, Camera per unit.

Q: 4. Will this work for the Olympus FL900 and FL600 flashes ???? Jim

A: Unfortunately, Godox does not have an Olympus receiver to provide full program modes. If You used this Godox Nikon receiver, it would only allow Your flash to be activated. Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon B&H # GOX1RN MFR # X1R-N

Q: 5. I see that it will allow HSS with the K-3ii, but what about with the older K-3?

A: The original K3 should offer the same HSS functional with this remote as it does with the K3 II. However, Godox has not tested the original K3 to confirm this. Your results may vary.

Q: 6. Overview says that the X ProS offers 2nd curtain syn. I don't see it on the transmitter. Does anyone know how to activate 2nd curtain syn on it?

A: You would activate it directly on the camera with the "Rear curtain" function.

Q: 7. Will this work with my Canon 5d Classic with my Evolv200?

A: The remote will work with your camera. It should work with the the light.

Q: 8. can this work control the GODOX SK300II MONOLIGHT?

A: Yes, it would be perfect for triggering and controlling the settings of the Godox SK300II.

Q: 9. Will this work with the Canon 470ex-ai?

A: The Canon 470EX-AI does not have a wireless receiver built in. If you use a Godox receiver you can use it with a XPro. https://bhpho.to/2sVXeE7

Q: 10. Does TTL actually work? Before anyone answers, please check because Godox has a bad history with this unit and Sony TTL. TIA

A: I have it for canon and it works perfectly!