The black Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and TA3F Connector for Audix Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA3F connector for direct connection to Audix B60 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. work with canon 5d mk4?

A: Yes, the Godox XProC TTL wireless flash trigger will work with the canon protocol system.

Q: 2. Will it work with a Nikon SB-R200?

A: Due to firmware the Nikon SB-R200 Wireless Remote Speedlight will only reliably work with Nikon SU-800 Wireless Speedlight Commander Unit https://bhpho.to/3TKyqJa, it will not work with Godox XProN TTL Wireless Flash Trigger for Nikon Cameras.

Q: 3. I just received the GodoxXproc I purchased yesterday. I bought it to use my 430Ex III RT flash off camera, but it will not fire.

A: Correct, the two systems have different protocol systems the following receiver is needed in order to trigger off your canon 430ex III RT. Please review the following item Godox X1R-C TTL Wireless Flash Receiver for Canon BH #GOX1RC • MFR #X1R-C https://www.bhphotovideo.com/c/product/1341961-REG/godox_photo_equipment_x1r_c_ttl_remote_controller.html

Q: 4. Hello, I have an a6600 and a Sony HVL F28RM flash to put on an umbrella. Do I need a transmitter and a receiver necessarily? According to the manual, the flash can connect wirelessly to others, if necessary, does this transmitter work for me? Thank you

A: Yes, the following is needed in order to drive the system. Godox X1R-S TTL Wireless Flash Receiver for Sony BH #GOX1RS • MFR #X1R-S https://www.bhphotovideo.com/c/product/1341963-REG/godox_x1r_s_ttl_remote_controller.html

Q: 5. Will this work with a Godox Wistro AD360ii-C?

A: Yes it will work well

Q: 6. I have got following strobes : 3 GDX QS 400iii 2 Newer s-300 2 Newer Vision 4 Any universal trigger/receivers for this combo?

A: No, there is no universal Trigger that will fire both the Godox and the Neewer strobes, using their native built in radio. However it is possible to purchase the Godox X1R-C TTL Wireless Flash Receiver for Canon. When paired with the Godox XProC TTL Wireless Flash Trigger for Canon Cameras, this will allow you to trigger your Neewer Flashes using the Godox radio system. Simply plug in a receiver into each of the Neewer flashes by connecting the supplied cables into the 3.5mm Sync socket of the Neewer Flashes. After addressing the Trigger and Receivers to the desired channels and groups, you will be all set to fire all strobes.

Q: 7. Flash trigger for Tt350f

A: Yes, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras works with the Godox TT350F Mini Thinklite TTL Flash for Fujifilm Cameras.

Q: 8. I currently have the D750 & SB700 and I know that I would need the receiver in order to use the sb700. But I am planning to buy the AD200 and I do not know if I can use this XProN or the X2? I do not need the X2 hot shoe. I am worried about the compatibility because in XProN Godox site they do not mentioned the SB700. Should I get the X2 to be sure? I do like the screen of the XProN but I need to be sure before spending $. Thank you!

A: The XPro will work with a SB700 as long as you have the receiver under the flash. If you do not need the shoe on the transmitter than it is a easier to use option than the X2. Its fully capable of working with the receiver and the AD200.

Q: 9. I have a Canon 70D and a godox 200. Is this unit compatible?

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras will work with the Canon 70D and the Godox AD200.

Q: 10. Is the Godox XPro II TTL compatible with both the D6 and Z9? And once attached will they trigger the SB910 & SB5

A: This transmitter will work with your Nikon cameras but to trigger off camera Nikon flashes you do need a receiver under your Nikon flashes to receive the signal from the trigger. You can get the Godox X1R-N TTL Wireless Flash Receiver for Nikon B&H # GOX1RN MFR # X1R-N.