The tan Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 3-Pin Connector for WisyCom Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this trigger a Panasonic LUMIX DMW-FL360L flash?

A: The Godox XProO TTL Wireless Flash Trigger for Olympus and Panasonic Cameras does not trigger the Panasonic LUMIX DMW-FL360L flash.

Q: 2. Does the AF assist beam work with Nikon Z cameras? Z cameras use green assist light.

A: The AF assist beam on the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras does not work with mirrorless cameras, including the Nikon Z series cameras.

Q: 3. Does this have a sync cord connection and if so, will it reduce voltage to a safe level for the camera?

A: Godox XProS TTL Wireless Flash Trigger has 2.5 port on the receiver for trigering a monolight or other camera via a pc cable. using a sync cord is safe to use for cameras.

Q: 4. can you only trigger five flashes? A thru E

A: Yes, you can trigger separately five Godox flashes differently if you set the Godox XProC TTL Wireless Flash Trigger for Canon Cameras, to A-E groups.

Q: 5. Are the Godox XPROC with the Einstein 640 WS strobes?

A: They will only operate as a simple activation of your strobe if you purchase the following, Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon BH #GOX1RN • MFR #X1R-N plus Nisha Miniphone 1/8" (3.5mm) Male to Submini (2.5mm) Male Sync Cord (16") B&H # NIFSC163525 MFR # FSC163525

Q: 6. Does this trigger work with Canon R6 Mark II and Canon Speedlite EL-5 flash?

A: The Godox XProC TTL Wireless Flash Trigger for Canon Cameras BH #GOXPROC is not directly compatible with an EL-5 speedlight. You would also need a B&H # GOX1RC for the speedlight to make it work.

Q: 7. Will this unit work as a transmitter for canon speedlights?

A: not directly. You would need to attach Godox X1Rc to your Canon units.

Q: 8. Hi, I have tried this transmitter on my canon R, the focus assist light does not work, Does anyone know how to activate it? Thank you

A: Unfortunately, due to the sensor design of mirrorless digital cameras, they cannot read infrared light. As such, an AF assist that uses infrared light, such as the Godox XProC TTL Wireless Flash Trigger for Canon Cameras (B&H # GOXPROC), will not work with a mirrorless camera like the Canon EOS R.

Q: 9. Will these work using an older Photogenic powerlight 375 with a Canon 7D or a 5Ds camera?

A: The Vello Freewave LR would not be compatible with the older Photogenic Powerlight 375 monolights due to their higher sync voltage.

Q: 10. Will this trigger both Sony and Nikon flashes if they all have Godox receivers?

A: Yes it will