The tan Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 4-Pin Connector for Beyerdynamic Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS 316, TS 400, and TS 600 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Are there good English instructions for setup and operation somewhere? The manual that comes with the trigger is poorly translated and difficult for this newbie to make sense of.

A: Your best bet is to look at some you tube videos.

Q: 2. will this trigger work on the v1C flash without a receiver

A: Yes.

Q: 3. Can this Godox XProS trigger Rotolight AEOS II in HSS ? (And if yes; than only with an additional receiver - bypasssing the built-in Elinchrom skyport ?)

A: Not sure. I use it to trigger my Nikon SB700 speedlight along with the x1R receiver.

Q: 4. Focus assist with my canon R doesn't work

A: Unfortunately, infrared AF-assist beams do not work when used on the Canon EOS R Mirrorless Digital Camera. As indicated on page 264 of the Canon EOS R Mirrorless Digital Camera's instruction manual, when using an external flash that has an AF-assist beam, a small series of flashes would be fired by the flash instead of using the AF-assist beam. It states a small series of flashes is fired even if you set the external flash's AF-assist beam emission method in the Personal Functions to infrared AF-assist beam firing. Unfortunately, as the Godox XPro-C wireless radio flash transmitter does not have a flash or emit a flash beam, there would be no AF-assist capability when using this on the Canon EOS R Mirrorless Digital Camera (however, the AF-assist beam would work when using this transmitter on a DSLR camera).

Q: 5. Is there a yet a workaround to use a sony or Nissan flash with this trigger and receiver to enable full wireless control?

A: If you have Sony or Nissin flash and you need to use the wirelessly you will need a Godox Receiver Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony BH #GOX1RS

Q: 6. Will this work with a non canon Godox flash?

A: Yes this transmitter can fire Godox flashes.

Q: 7. Is the Godox XPro II TTL compatible with both the D6 and Z9? And once attached will they trigger the SB910 & SB5

A: This transmitter will work with your Nikon cameras but to trigger off camera Nikon flashes you do need a receiver under your Nikon flashes to receive the signal from the trigger. You can get the Godox X1R-N TTL Wireless Flash Receiver for Nikon B&H # GOX1RN MFR # X1R-N.

Q: 8. So this has not fixed the HSS on CANON Mirrorless cameras while used in any of the camera's auto settings?

A: Many have gotten the Godox XProC TTL Wireless Flash Trigger for Canon Cameras to work with CANON Mirrorless cameras while used in any of the camera's auto settings. But some have not and best is to make sure you have the latest firmware on the light and transmitter.

Q: 9. Anyone know how to activate 2nd curtain sync on the Godox XPROS for Sony cams? I can't seem to find that feature although it's supposed to have it.

A: Its activated on the camera

Q: 10. Will this trigger both Sony and Nikon flashes if they all have Godox receivers?

A: Yes it will