The black Countryman E6i Directional Earset Mic, Medium Gain with Detachable 2mm Cable and cH-style 4-pin Connector for Audio Technica Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-T5201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the max Leaf Shutter sync speed?

A: The max sync speed is 1/250s.

Q: 2. So this has not fixed the HSS on CANON Mirrorless cameras while used in any of the camera's auto settings?

A: Many have gotten the Godox XProC TTL Wireless Flash Trigger for Canon Cameras to work with CANON Mirrorless cameras while used in any of the camera's auto settings. But some have not and best is to make sure you have the latest firmware on the light and transmitter.

Q: 3. Is the Godox XPro II TTL compatible with both the D6 and Z9? And once attached will they trigger the SB910 & SB5

A: This transmitter will work with your Nikon cameras but to trigger off camera Nikon flashes you do need a receiver under your Nikon flashes to receive the signal from the trigger. You can get the Godox X1R-N TTL Wireless Flash Receiver for Nikon B&H # GOX1RN MFR # X1R-N.

Q: 4. Will these work using an older Photogenic powerlight 375 with a Canon 7D or a 5Ds camera?

A: The Vello Freewave LR would not be compatible with the older Photogenic Powerlight 375 monolights due to their higher sync voltage.

Q: 5. Is there a yet a workaround to use a sony or Nissan flash with this trigger and receiver to enable full wireless control?

A: If you have Sony or Nissin flash and you need to use the wirelessly you will need a Godox Receiver Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony BH #GOX1RS

Q: 6. Hi, I have tried this transmitter on my canon R, the focus assist light does not work, Does anyone know how to activate it? Thank you

A: Unfortunately, due to the sensor design of mirrorless digital cameras, they cannot read infrared light. As such, an AF assist that uses infrared light, such as the Godox XProC TTL Wireless Flash Trigger for Canon Cameras (B&H # GOXPROC), will not work with a mirrorless camera like the Canon EOS R.

Q: 7. Focus assist with my canon R doesn't work

A: Unfortunately, infrared AF-assist beams do not work when used on the Canon EOS R Mirrorless Digital Camera. As indicated on page 264 of the Canon EOS R Mirrorless Digital Camera's instruction manual, when using an external flash that has an AF-assist beam, a small series of flashes would be fired by the flash instead of using the AF-assist beam. It states a small series of flashes is fired even if you set the external flash's AF-assist beam emission method in the Personal Functions to infrared AF-assist beam firing. Unfortunately, as the Godox XPro-C wireless radio flash transmitter does not have a flash or emit a flash beam, there would be no AF-assist capability when using this on the Canon EOS R Mirrorless Digital Camera (however, the AF-assist beam would work when using this transmitter on a DSLR camera).

Q: 8. Is the newest model for the Lumix S5IIX?

A: No, this is not the latest model, but it will work with S5IIX. If you looking for the most recent release it will be Godox Xnano O Touchscreen TTL Wireless Flash Trigger for Olympus and Panasonic https://bhpho.to/3K44zWJ and before that was Godox XPro II TTL Wireless Flash Trigger for Olympus and Panasonic Cameras https://bhpho.to/3zAvrZo

Q: 9. Can we connect Godox trigger with Altura flash? and how?

A: No, Altura sells it's own Transmitter trigger for their flashes.

Q: 10. Hello, I have an A6600 camera and a HVL F28RM flash, this transmitter is compatible with both, can I sync to HSS?

A: Yes, via TTL mode be mindful that both flash and commander must be in HSS mode and a Godox X1R-S TTL Wireless Flash Trigger must be attached to flash unit in order to do so.