The tan Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm Connector for Comtek Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this trigger both Sony and Nikon flashes if they all have Godox receivers?

A: Yes it will

Q: 2. Is this compatible with a99 / a99 II?

A: Yes, this will work with the Sony SLT-A99 and SLT-A99 II.

Q: 3. Can we trigger Yn-560-IV using this flash?

A: The YN-560 IV has an optical slave trigger so it can be set to fire when any other flash goes off in the same area. It's slave can be set to ignore pre-flash common when operating YN685 in TTL. But there is no RF communication between the 2 units.

Q: 4. Is the newest model for the Lumix S5IIX?

A: No, this is not the latest model, but it will work with S5IIX. If you looking for the most recent release it will be Godox Xnano O Touchscreen TTL Wireless Flash Trigger for Olympus and Panasonic https://bhpho.to/3K44zWJ and before that was Godox XPro II TTL Wireless Flash Trigger for Olympus and Panasonic Cameras https://bhpho.to/3zAvrZo

Q: 5. Will this work with a Godox Wistro AD360ii-C?

A: Yes it will work well

Q: 6. Will the Godox XProS TTL Wireless Flash Trigger for Sony Cameras work with the Sony RX-10 IV? And flash synch up to 1/2000?

A: According to all the specifications the Godox XProS TTL Wireless Flash Trigger for Sony Cameras should work with the Sony RX10 IV with a Godox flash in HSS up to 1/2000. It has not been tested by either company.

Q: 7. Can we connect Godox trigger with Altura flash? and how?

A: No, Altura sells it's own Transmitter trigger for their flashes.

Q: 8. will it work on Nikon SB 5000?

A: This is a trigger that goes on the camera's hot shoe, then you will have to attach the Godox receiver to the SB5000. The SB5000 will not communicate with Godox directly, you need the receiver.

Q: 9. Hi, I have tried this transmitter on my canon R, the focus assist light does not work, Does anyone know how to activate it? Thank you

A: Unfortunately, due to the sensor design of mirrorless digital cameras, they cannot read infrared light. As such, an AF assist that uses infrared light, such as the Godox XProC TTL Wireless Flash Trigger for Canon Cameras (B&H # GOXPROC), will not work with a mirrorless camera like the Canon EOS R.

Q: 10. Does this trigger work with Canon R6 Mark II and Canon Speedlite EL-5 flash?

A: The Godox XProC TTL Wireless Flash Trigger for Canon Cameras BH #GOXPROC is not directly compatible with an EL-5 speedlight. You would also need a B&H # GOX1RC for the speedlight to make it work.