The tan Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm Locking Connector for Sony Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. How does it work to change shutter speed remotely? Is there some way to see the shutter speed on the remote? Or will I need some model with an LED screen for that? If so, what's the cheapest/best outfit for that? And I assume compatible with a Canon 5d mark iii

A: No, the wireless shutter release, Vello FreeWave Wireless Remote Shutter Release for Canon w/3-Pin Connection, is only a shutter release. It does not control any settings.The only ones that allow you to do that use a smart device.This is an example of one, CamRanger Wireless Transmitter Kit with Extra Battery for Select Canon and Nikon DSLRsB&H # CA1001K (B&H Kit)http://bhpho.to/1cr2v5a

Q: 2. Does this work with an fuji xt-1?

A: This version of the Vello FreeWave is not compatible with the Fujifilm XT-1. You need the FreeWave with Sub-Mini Connection: http://bhpho.to/1fEV3pg

Q: 3. Is this compatible with the Sony a6300?

A: The Sony FA-WRC1M Wireless Radio Commander with FA-WRR1 Wireless Radio Receiver Kit is compatible with the a6300.

Q: 4. Does the Godox x2t have low light focus assist beam for Sony a7 cameras?

A: Yes the AF assist beam would be available for Sony A7 series cameras.

Q: 5. Will this remote work on the canon 7d mark II ?

A: The FreeWave Wireless Remote Shutter Release for Canon w/3-Pin Connection will be compatible with the 7D II, yes. The 7D II has the 3-pin (N3) remote connection.

Q: 6. Does this work with a Sony A9ii?

A: Yes, it is compatible with the A9II.

Q: 7. Does this work with the sony a9?

A: Yes, the Sony FA-WRC1M Wireless Radio Commander with FA-WRR1 Wireless Radio Receiver Kit would be fully compatible for use with the Sony Alpha a9 Mirrorless Digital Camera.

Q: 8. Can You tell me the difference between the FW wireless remote and the FW PLUS wireless remote ?

A: The main difference is the Plus runs 2.4GHz. The 2.4GHz reduces interference frequency better than the non-plus model which runs 433 MHz.

Q: 9. How do you set these up to do stroboscopic Flash?

A: Please follow the following steps 1. In the multi flash (TTL and M icon are not displayed). 2. The three lines are separately displayed as power output value, Times(flash times) and Hz (flash frequency). 3. Turn the Select Dial to change the power output value from Min. to 1/4 in integer stops. 4. Short press the Times button can change flash times. Turn the select dial to change the setting value. 5. Short press the Hz button can change flash frequency. Turn the select dial to change the setting value 6. Until all the amounts are set. Or during any value setting, short press the MODE button to exit the setting status. No values will blink. 7. In the multi flash setting submenu, short press the MODE button to return to main menu when no values are blinking

Q: 10. Will this product work with Kodak PixPro AZ361?

A: Unfortunately the FreeWave remote is not compatible with the Kodak AZ361 which does not have the 10-pin remote connection needed to use that product.