The tan Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Azden Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with 860ii flashes?

A: Yes, the XPRO-S trigger will work with Godox flashes such as the VING V860II-S for Sony.

Q: 2. Will this product work with a Canon 600EX II-RT?

A: One must use the additional receiver under Your flash to be compatable. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC MFR # X1R-C

Q: 3. Will it works in iTTL mode with an Nikon SB900 flash ?

A: It can work as long as you have a X1r-N https://bhpho.to/2Xj9N7M.

Q: 4. is this fully compatable Godox AD400Pro Witstro All-In-One Outdoor Flash?

A: Yes this trigger is fully compatible with the Godox AD400 Pro.

Q: 5. Focus assist with my canon R doesn't work

A: Unfortunately, infrared AF-assist beams do not work when used on the Canon EOS R Mirrorless Digital Camera. As indicated on page 264 of the Canon EOS R Mirrorless Digital Camera's instruction manual, when using an external flash that has an AF-assist beam, a small series of flashes would be fired by the flash instead of using the AF-assist beam. It states a small series of flashes is fired even if you set the external flash's AF-assist beam emission method in the Personal Functions to infrared AF-assist beam firing. Unfortunately, as the Godox XPro-C wireless radio flash transmitter does not have a flash or emit a flash beam, there would be no AF-assist capability when using this on the Canon EOS R Mirrorless Digital Camera (however, the AF-assist beam would work when using this transmitter on a DSLR camera).

Q: 6. Does the AF assist beam work with Nikon Z cameras? Z cameras use green assist light.

A: The AF assist beam on the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras does not work with mirrorless cameras, including the Nikon Z series cameras.

Q: 7. Will the Godox XProS TTL Wireless Flash Trigger for Sony Cameras work with the Sony RX-10 IV? And flash synch up to 1/2000?

A: According to all the specifications the Godox XProS TTL Wireless Flash Trigger for Sony Cameras should work with the Sony RX10 IV with a Godox flash in HSS up to 1/2000. It has not been tested by either company.

Q: 8. Will the Godox XPro work with Canon flashes? Such as the 580 EXII or the 600 EX/EX II

A: In order for the Godox XProC Trigger to fire the Canon 580EX II or the Canon 600EX RT/EX II RT flashes, you would need to attach a Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon, BH # GOX1RC. https://bhpho.to/3kcLQ1h

Q: 9. Will this work with the Neewer Vision4?

A: The only way to fire the Neewer Vision4 with the XPro C trigger is to add the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC. https://bhpho.to/2sreE7N

Q: 10. Will this unit work as a transmitter for canon speedlights?

A: not directly. You would need to attach Godox X1Rc to your Canon units.