The tan Countryman E6i Directional Earset Mic, Standard Gain with Detachable 2mm Cable and LEMO 4-pin Connector for Beyerdynamic Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS-170, TS-170p, VHF TS-190, and TSP wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Focus assist with my canon R doesn't work

A: Unfortunately, infrared AF-assist beams do not work when used on the Canon EOS R Mirrorless Digital Camera. As indicated on page 264 of the Canon EOS R Mirrorless Digital Camera's instruction manual, when using an external flash that has an AF-assist beam, a small series of flashes would be fired by the flash instead of using the AF-assist beam. It states a small series of flashes is fired even if you set the external flash's AF-assist beam emission method in the Personal Functions to infrared AF-assist beam firing. Unfortunately, as the Godox XPro-C wireless radio flash transmitter does not have a flash or emit a flash beam, there would be no AF-assist capability when using this on the Canon EOS R Mirrorless Digital Camera (however, the AF-assist beam would work when using this transmitter on a DSLR camera).

Q: 2. Will this Fuji trigger work with Godox V1 for Canon? Not interested in TTL, only manual, and continuous shooting at 11fps.

A: A Godox V1 off camera does not matter which one. If the XPro remote is the correct foot for the camera its on you can do TTL HSS and have all the controls. The V1 lithium is very fast. At full power it will not keep up but as you turn it down around 1/32 it should be able to keep up with fast bursts very well.

Q: 3. Will this also transmit in infrared to substitute as a commander to trigger a Metz ring flash. I just got a Nikon z6 and I'm trying to have one accessory work with both strobes and the wireless ring flash.

A: This is only a radio transmitter. It does not give off any optical transmission.

Q: 4. I'm using the X Pro C with my R5 to trigger several off-camera Godox strobes/flashes. My experience is that all strobes must be on the same Channel (e.g., Channel 1). If I assign some to Channel 1 and others to Channel 2, I cannot fire both channels simultaneously. Only the channel that is active on the trigger fires. Am I missing something or is it not possible to fire multiple channel simultaneously? Thanks.

A: Only the channel that is selected on the transmitter can fire those strobes. channel 1 on transmitter will fire only those lights on channel. You can use different to turn light on and off.

Q: 5. Ricoh Gr iii

A: Yes. The following unit will work there will be no TTL communication.

Q: 6. Can anyone confirm this works with a Nikon D600 and SB-800s. Also, does TTL mode work with this combination? I saw where it does not on some reviews.

A: As long as you are using a Godox X1R-N receiver on the SB-800, the XPRO N should have no problem firing it.

Q: 7. Is this compatible with a99 / a99 II?

A: Yes, this will work with the Sony SLT-A99 and SLT-A99 II.

Q: 8. work with einstein strobe?

A: You may connect the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN to an Einstein monolight in order to trigger from the X-Pro N transmitter. However, only manual flash sync will be available with no control over the flash output or TTL/HSS. https://bhpho.to/2LOILD4

Q: 9. Does this work with the X-T3?

A: Yes, its compatible to all current Fuji cameras.

Q: 10. will this work with rebel T7?

A: The XPro C will work with a Rebel T7.