The light beige Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm locking Connector for Azden Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What are the outer dimensions of the case that holds two SmallRig RC 220B lights?

A: Regarding the SmallRig RC 220B Bi-Color LED Monolight (2-Light Kit), the case that holds the two SmallRig RC 220B lights is 19.5 x 10.5 x 9.5".

Q: 2. Does the power supply work with 220v?

A: Yes the SmallRig RC 220B COB is multivoltage and can be used on 220VAC. You will just need a plug end adapter. It ships with a North American plug.

Q: 3. Aperture barndoors are listed as an accessory, will they in fact fit the Smallrig fixture?

A: Since the Aputure Barndoors utilize the Bowens S mount as does the RC 220B, they can be used together.

Q: 4. Is this good for Filmmakers ?

A: Yes. Great tool for any photographers and filmmakers ideally the unit is made for the demanding photographer as it has a built-in transmitter system.

Q: 5. How long does this meter take to boot up? From completely off to completely useable.

A: The start time is about 4 seconds from the time the power button is pressed and held.

Q: 6. What's the weight of a softbox that it will support? I have a large softbox and I cannot tighten the pivot enough for it to stay upright. It just sinks down.

A: The ratchet handle can be adjusted in order to provide the right support to hold different types of light shaping tools. Please contact our live chat team for support.

Q: 7. Are there any issues using this with a fresnel? The Amaran 200x has rows of cool and warm LEDs, so using a fresnel with that light is problematic. The SmallRig 220b seems to have similar rows of LEDs.

A: No. The following system does not adapt to any fresnel system.

Q: 8. which would you get, with or without the transmitter module? i have both PocketWizards and Flashpoint strobes. what are the benefits with and without the POCKETWIZARD transmitter module? what are the benefits with and without the GODOX / FLASHPOINT transmitter module? tell me more, tell me about the benefits with & without? thank you!

A: The transmitter modules may be purchased separately and swapped. Because you have both PocketWizard and Godox products, unfortunately, you will have to find workarounds to get both to trigger.

Q: 9. Hi The version L-850D - U, (U for USA) can also work in PAL system 25 fps and 1/50 T, or is it only done by the L-850D? BR. Renzo

A: We believe you mean the Sekonic Speedmaster L-858D-U Light Meter B&H # SEL858DU for we were unable to find the the L-850D-U, even on the Sekonic discontinued site. In any event, the L-858-U does do all standard frame rates including 25FPS PAL.

Q: 10. Is there a color meter option?

A: Yes, this Sekonic color meter is excellent: https://www.bhphotovideo.com/c/product/1436631-REG/sekonic_401_800_c_800_spectomaster_meter.html