The cocoa Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and TA3F Connector for Audix Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA3F connector for direct connection to Audix B60 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I have several YN560-IIIs with a 560-TX controller. Great system. They work with my Sony A7iii. Now I want to add some HSS. Any idea if the YN HSS will sync with the Sony?

A: Unfortunately, Yongnuo does not have any TTL flashes in their lineup compatible for use with Sony's TTL automatic flash system that would provide High Speed Sync capabilities with Sony cameras.

Q: 2. Can I use some cable to shoot with the Bolt VS-570F flash in TTL mode AND off camera? If yes, do you think the HSS will work too? I appreciate your help! (I own an X-T10 and need to shoot off camera in TTL mode; thank you!)

A: You wouldn't need an off-camera TTL cable to use this flash TTL off camera - this is a wireless TTL flash featuring slave functionality.

Q: 3. Will I be able to use this flash with my Nikon D300 and fire it wirelessly? I don't mean as a slave, it will be my only flash, but I would like to be able to use it without any cables.

A: This flash will mount directly onto the cameras hotshoe and fire as any traditional flash will and does not require any type of cables or adapters to do so.

Q: 4. Will this Godox trigger fire a Rotolight NEO 2?

A: The Godox XProN TTL Wireless Flash Trigger for Nikon Cameras is not compatible to fire the Rotolight NEO 2 LED Light.

Q: 5. The f stop always shows on the VS-570N and I shoot manual from the camera and manual from the flash using Vello trigger system and the the f stop on the flash never goes away, does the f8 on the flash affect the flash out come?

A: The f/stop displayed on the flash is normal and does not have anything to do with the output as long as you have the flash set to manual not TTL.

Q: 6. This is driving me crazy. With a Sony A6500 how do I use HSS with this unit and a godox ad200?? Both the trigger and the unit say HSS and the camera wont get any usable images above 200 shutter speed....

A: If half of the image is not exposing (is dark ) then you are not achieving HSS if you are over/under exposing you just have to adjust the F-STOP on the camera ( make sure you have Sony trigger )

Q: 7. I have the Godox SK400II light system, will I need anything else to get this to work with those strobes?

A: No. The following unit communicate with the system well over a 100ft. Be mindful that there will be no TTL metering.

Q: 8. Will this work with the Sony A6000 camera?

A: According to Vello, this kit is not compatible with cameras that utilize the Sony Multi-Interface Shoe like the Sony A6000 or the Sony A7.

Q: 9. How would you adjust the shutter speed on your camera while using this flash (YN685)? I have a D600 camera. Thank you.

A: Generally, the shutter speed would need to be at or below the flash sync speed of your camera body. In the case of the D600, you would need to be at or below 1/200th.

Q: 10. will the Godox XPro O (Olympus & Panasonic) TTL trigger work on a Leica SL for TTL and HSS? I was hoping since the SL and Panasonic are sort of related. Thx

A: They are not compatible.