The light beige Countryman E6X Directional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm locking Connector for Olympus, Roland, Sony, Tascam, Yamaha, or Zoom Portable Recorders is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Olympus, Roland, Sony, Tascam, Yamaha, or Zoom DM-420, DM-520, DM-620, DS-2400, DS-40, DS-51, DS-61, DS-71, LS-10, LS-14, R05, R09HR, PCM-D50, PCM-M10, DR-05, DR-07mkII, DR-08, PR-10, Pocketrak C24, Pocketrak W24, H1, H2, and H2n portable recorders.

For Stage, Theater, and Broadcast TV    Fits Select 3.5mm Recorders    Headroom for General Speaking    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can the switcher scale inputs at different resolutions? For instance, can it accept a 1080p camera, a 720p computer signal, and output a 1080i signal?

A: I have not actually tested it but it may work. The mixer has a switch that you select the output (1080i, 1080p or 720p).Setting your output at 1080i m will still allow you to input even 1080p through channels 1 to 3 then you can use channel 4 which has a built in scaler to input a 720p HDMI from your computer

Q: 2. Will this flash work a a Panasonic LUMIX G7 with a Panasonic 30mm macro lens?

A: It will work manually. You will not have TTL.

Q: 3. Anyone know what a orange square on the monitor means?? It's in the upper right corner of one of the 4 HDMI preview screens.

A: The lit red means final output video. Lit green means preset video (the video to be output next).

Q: 4. can it be rack mount?

A: No. Unless you find a way to rig it yourself but there is no bolt on setup for it. I use velcro onto a mobile video cart we use.

Q: 5. Can I use Canon XA10 cameras that only record at 1080 i/p 30 fps with this mixer?

A: You need to convert the signal from the camera. You can use this converter. It take the camera's HDMI signal and turns it into and 59.94 for the mixer. Datavideo DAC-9P HDMI to HD/SD-SDI 1080p/60 Converter B&H # DADAC9P.

Q: 6. What program or device is recommended for playing mpeg videos? Ideally, the video would automatically play when that source is selected so the operator doesn't have to press play after the source is selected.

A: The Roland V-1HD is HDCP compliant, which gives you a wide variety of options for MPEG Video Playback. You could connect a computer with an HDMI output directly to this unit, or you could look at Media Players with HDMI like a Roku or Apple TV. You could even connect a tablet to this switcher and play back video that way. However there is no product available that will automatically start playing when you switch to the assigned channel, the operate will have to manually start the video.

Q: 7. What else do I need to stream from this gear?

A: To stream from the HDMI output on this switcher you could look in to HDMI Capture Device which will allow you to capture the signal for streaming in to your computer. The BMD UltraStudio Mini Recorder is a good option for people with a Mac that has a Thunderbolt connection. Magewell makes a very nice solution for PC/Mac users who have a USB 3.0 connection. The Magewell device is even backwards compatible with USB 2.0. Another solution is streaming devices that will allow you to send the signal directly to the web. The Teradek VidiU will allow you to send the signal to a variety of streaming services.

Q: 8. Will this mount to the Panasonic DG Macro 45mm 2.8 ?

A: Yes this will fit and function on that lens.

Q: 9. Does this come with diffusers , if not, where can you buy them ????

A: It comes with two diffusers. Unfortunately you're going to need more diffusion. They're like the ubiquitous Sto-Fen diffusers, if you find that adequate fine, but for softer lighting you'll need some kind of DIY solution to put between the flash heads and the subject.

Q: 10. Can I use GoPro Hero4 cameras with this switcher?

A: Yes, I have (3) GoPro Hero 4 Black cameras attached to the unit and it works perfectly.