You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Highest Overload, With Detachable 2mm Cable And 3-pin Xlrm Connector For Lectrosonics Wireless Transmitters (beige)

Countryman E6 Directional Earset Mic, Highest Overload, With Detachable 2mm Cable And 3-pin Xlrm Connector For Lectrosonics Wireless Transmitters (beige)
  • Product Code: ga254301
  • Availability: In Stock

$1,931.85 $3,013.69

The beige E6 Directional Earset Mic, Highest Overload, with Detachable 2mm Cable and 3-Pin XLRM Connector for Lectrosonics Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 3-pin XLRM connector for direct connection to an Lectrosonics HM, UH200d, UH400, or UH400a wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    3-Pin XLRM (LE), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersLectrosonics: HM, UH200d, UH400, UH400a
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Analog Output1x XLR 3-Pin Male
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersLectrosonics: HM, UH200d, UH400, UH400a
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB
Sensitivity0.6 mV/Pa
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level39 dB (A-Weighted)
Connectivity
Analog Output1x XLR 3-Pin Male
Cable Length5' / 152.4 cm
Cable Diameter0.08" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorBeige
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals

Related Questions and Answers

Q: 1. Is it compatible with Nikon D810?

A: Yes, the Yongnuo YN685 Wireless TTL Speedlite for Nikon Cameras, B&H # YOYN685N, would be compatible for use with the Nikon D810 DSLR camera.

Q: 2. Is this unit compatible with the TT350F flash?

A: Yes, I use it with my 350F and the 685Fworks really well. It's a pleasure to have remote done so easily.

Q: 3. Will these work with sony a7rii and alienbees b800

A: Yes, they'll work. The 3.5mm to 3.5mm cable that comes with the receiver will link the receiver unit to the AB B800.

Q: 4. Is it work with Nikon D750 and Nikon Speedlight SB-900?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit BH #VERFWLR will work in manual with an SB-800 and a D750.

Q: 5. i own a fuji gfx 50s , and a canon 600 ex rt II flash. if i bought Godox XProF TTL Wireless Flash Trigger for Fujifilm, will the Godox X1RC for Canon work with this set up?

A: Yes, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras will work on your Fuji gfx 50s with a canon flash and the Godox X1RCr. But the flash will only work in manual.

Q: 6. Can this be remotely triggered by a Sony a6000? Can the built-in camera flash trigger it, or do I need any additional equipment?

A: Yes, you can trigger from your sony a6000 using your built-in pop up flash ,no need or any additional equipment.

Q: 7. 1. Are Godox receivers (sold separately of course ) needed on Nikon Flashes ie SB700, SB800 for the Godox X Pro to work that is fire the flashes?

A: Yes, Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon B&H # GOX1RN

Q: 8. Will the Yongnuo 685 for Nikon Cameras work with the AC3 Zone Controller for Nikon?

A: muy buen producto, y anda perfectoen mi Nikon D810, lo unico que recalienta cuando se hacen demasiados disparos continuos, no pasa lo mismo con un sb de nikon y los radios tambien funcionan perfectamente

Q: 9. I have 2 nikon sb 600 flashes - will the godox XProN fire the flashes without having recievers attached?

A: No, the following system will only communicate with Godox echo system.

Q: 10. Hi. Pentax K3 II works in HSS with Godox XPro P???

A: Yes this transmitter will allow for HSS on the Pentax K3 II.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Roku Wireless Speakers (pair)

$449.97 $571.46

Products You May Like

Setwear Leather Fingerless Gloves (small)

$83.85 $101.46

Iogear True 4k 3-port Hdmi Switch

$149.97 $215.96

Qnap Tl-d400s 4-bay Jbod Enclosure

$897.00 $1,300.65

Hensel Bounce Adapter

$2,277.00 $3,165.03