The Telescopic Support Arm with Rod Bloc from SHAPE is a variable length support arm designed to stabilize a shoulder rig while keeping the user mobile. The unit consists of a telescopic arm, Rod Bloc, and multi-function shoe which can be independently adjusted to the user's preference.

The telescopic arm is a simple aluminum support which may be adjusted at two points, from a minimum length of 14" to a maximum of 20". The top end of the rod is capped by an adjustable single-knob joint which supports and positions the CNC machined aluminum Rod Bloc—the attachment point for a shoulder-mounted rig. At the arm's base is an internal spring designed to provide added control when tilting vertically, allowing the user to capture a more stable image while in motion.

The bottom end of the telescopic arm is fitted with SHAPE's multi-function shoe—a cup-style base designed to rest against the user's torso or in a support belt for additional stability. If needed, the shoe may be removed so that the arm may be used as a boom, providing a connection point for a monitor, microphone, light, and more.

For DSLR/Mirrorless & Video Cameras    Stable Shoulder-Mounted Shooting Rig    Paparazzi Riser with 15mm Rod System    Quick Handle with Rod Bloc    Telescopic Support Arm with Rod Bloc    Offset Rail Bloc    Pair of 6" Male-Female 15mm Rods    Adjustable Composite Shoulder Pad    Back Pad

Related Questions and Answers

Q: 1. I have a Sony L-Series Twin Charger and wanted to know if it could charge these Shape L-Series batteries? Thank you!

A: Yes, The SHAPE NP-F980 would be able to charge using Sony brand chargers.

Q: 2. I bought this thing. There is no instructions included. The height doesn't adjust. It is not user friendly! Are there instructions online???

A: For help locating an instruction manual feel free to email us directly at askbh@bhphoto.com.

Q: 3. Why would I use the low-power charging mode? Is there any downside to the high power mode? I have this charger but don't know.

A: The SHAPE NP-F980 Dual Charger with Two 6600mAh Lithium-Ion Batteries (B&H# SHNPF2B) offers what the the manufacturer calls a high-current mode and also a low-current mode. While the voltage is the same, the former (high-current) would typically be used for larger batteries or for a faster charge. The latter (low-current) mode would be used for the smallest batteries (e.g., 2500mAh and below) or to minimize the heat that is generated when a battery is charged. While it is best to allow a battery to cool before recharging it at all, if you needed to begin charging a warm battery immediately after use then it would be best to use the low-current mode at least until it cools down. Extreme heat (and cold) can damage batteries.

Q: 4. Will this cage fit the updated 12g Video Assist monitor? I see that the new model is a basically 1/4” thicker.

A: Hello Robert, Thank you for your question! We cannot guarantee our cage for the 4K monitor will fit the new 12G one, as our cage was specifically designed for the 4K, especially if you tell us the new one is a bit thicker physically. We hope this helps and we thank you for your interest in our products. The SHAPE team.

Q: 5. How long does it take to charge 2x 65wh batteries?

A: These would take approximately 4 hours to charge.

Q: 6. The battery is charged via its D-tap port, and then when in use, the D-tap port can power a Ninja V for example--correct...?

A: Yes, the SHAPE BP-U100 Lithium-Ion Batteries support D-Tap outputs, and a 5V/2.1A USB-A port provide powering options for other accessories.

Q: 7. An article on 4kShooter said that this battery has a 12 volt output port (like the Powerextra batteries had before they changed the design). DOES THIS HAVE A 12v OUTPUT? Barrel connector? D-Tap?

A: Hello Steve, Thank you for your question! Unfortunately, it doesn't have a 12V output, no D-Tap or barrel connector either. Only a 5 Volt Micro-USB connector on the side. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 8. How long does this charger take to charge the batteries? One by itself and both together.

A: In high-current mode, the SHAPE NP-F Dual-Bay Charger with LCD (B&H# SHNPFCH) will charge one 6600mAh Sony L-series type battery (popularly called "Sony NP-F") in about 4-5 hours. Also, in high-current mode, the time needed to charge two such batteries would be 8-10 hours.

Q: 9. Do these batteries work with Sony FX9? Thanks

A: Yes, these are BP-U style batteries, which the Sony FX9 are compatible with.

Q: 10. Will this grip fit the Nikon D90?

A: The SmallRig L-Shape Grip For Nikon Z FC will not fit the Nikon D90.