The cocoa Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 4-pin Connector for Vega Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a LEMO 4-pin connector for direct connection to Vega 77 and 677 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Vega Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Well I just got this speedlite and after about 20 minutes of use the LCD screen stopped lighting up. Is this common? I cannot get it to light back up even after taking batteries out and putting them back in. Anyone else have this issue?

A: Personally, I haven't seen this problem. I've purchased my unit in January and so far so good.

Q: 2. Can I use this with the sony 60rm flash?

A: Only by attaching the Godox reciever for Sony, to the flash.

Q: 3. I have 2 nikon sb 600 flashes - will the godox XProN fire the flashes without having recievers attached?

A: No, the following system will only communicate with Godox echo system.

Q: 4. is this compatible with my Metz 52-AF-1?

A: This is not compatible with your Metz.

Q: 5. Does the Godox ProNTTL Wireless Flash Trigger for Nikon need Godox receivers (sold separately) mounted on Nikon Flashes ie SB700 SB800 to fire the flashes. Plus can the Nikon flashes be used in manual mode not just TTL Mode when fired by the Godox XProN TTL Wireless Flash Trigger for Nikon cameras?

A: Yes you would need the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, BH #GOX1RN would needed for the SB-700 in order to fire it wireless from the XPRO N transmitter. http://bhpho.to/2LOILD4

Q: 6. If using a Godox X ProN, what settings do you use on your Nikon Speedlight?

A: If you have a Godox X1R-N attached to your Nikon speedlight, it would be best to use in TTL mode.

Q: 7. Will I be able to use this flash with my Nikon D300 and fire it wirelessly? I don't mean as a slave, it will be my only flash, but I would like to be able to use it without any cables.

A: This flash will mount directly onto the cameras hotshoe and fire as any traditional flash will and does not require any type of cables or adapters to do so.

Q: 8. Can I use these to fire a remote camera as I simultaneiusly fire my hand held camera? One X Pro mounted to hand held, and one mounted to remote cam, with (assumingly necessary) a sync cord?

A: Yes you can use Godox XProC TTL Wireless Flash Trigger to dedicated camera hot shoe and trigger other cameras using the Godox X1R-C TTL Wireless Flash Trigger Receiver on your 2nd camera. You will need to use the trigger cable available in the box of Godox receiver.

Q: 9. Does this work with canon 90D?

A: Yes. As well work with canon TTL metering system.

Q: 10. Can I use it with Sony cameras? Specifically A7III?

A: This system is not compatible with the Sony Multi-Interface Shoe as found on the A7 III. A compatible option with TTL and HSS functions available on it is the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony B&H # GOX1TS and the Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony B&H # GOX1RS. https://bhpho.to/2X0htLn https://bhpho.to/2S49A3Q