The cocoa Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Line 6 Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a TA4F connector for direct connection to Line 6 TBP12 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is works on Pentax 645z?

A: yes, This model is compatible with Pentax's TTL system

Q: 2. Does this work with canon 90D?

A: Yes. As well work with canon TTL metering system.

Q: 3. Does the Godox ProNTTL Wireless Flash Trigger for Nikon need Godox receivers (sold separately) mounted on Nikon Flashes ie SB700 SB800 to fire the flashes. Plus can the Nikon flashes be used in manual mode not just TTL Mode when fired by the Godox XProN TTL Wireless Flash Trigger for Nikon cameras?

A: Yes you would need the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, BH #GOX1RN would needed for the SB-700 in order to fire it wireless from the XPRO N transmitter. http://bhpho.to/2LOILD4

Q: 4. Does this work for a Canon rebel T6

A: It works on on my Canon T5 so it should work on the Rebel T6

Q: 5. Will I be able to use this flash with my Nikon D300 and fire it wirelessly? I don't mean as a slave, it will be my only flash, but I would like to be able to use it without any cables.

A: This flash will mount directly onto the cameras hotshoe and fire as any traditional flash will and does not require any type of cables or adapters to do so.

Q: 6. If using a Godox X ProN, what settings do you use on your Nikon Speedlight?

A: If you have a Godox X1R-N attached to your Nikon speedlight, it would be best to use in TTL mode.

Q: 7. The f stop always shows on the VS-570N and I shoot manual from the camera and manual from the flash using Vello trigger system and the the f stop on the flash never goes away, does the f8 on the flash affect the flash out come?

A: The f/stop displayed on the flash is normal and does not have anything to do with the output as long as you have the flash set to manual not TTL.

Q: 8. Is it work with Nikon D750 and Nikon Speedlight SB-900?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit BH #VERFWLR will work in manual with an SB-800 and a D750.

Q: 9. On April 26, 2016-4-26 you show this is available in 2 to 4 weeks. Today, 2016-5-21 you still show this as 2 to 4 weeks. How can this be? I ordered it on 2016-4-26 and what is estimated ship date for that?

A: I apologize, but this type of request cannot be taken care of through this feature of our website. Please contact our Customer Service department by entering Live Chat, emailing directly to cs@a href= http://bhphoto.com, target= _blank bhphoto.com,/a or calling us toll-free at 800.221.5743.

Q: 10. Is my Nikon Speedlight SB-700 compatible with this wireless flash trigger?

A: No, the following item is needed in order to adapt to the Nikon protocol system. Godox X1R-N TTL Wireless Flash Receiver for Nikon BH #GOX1RN • MFR #X1R-N https://www.bhphotovideo.com/c/product/1341962-REG/godox_x1r_n_ttl_remote_controller.html