The tan Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Shure Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a TA4F connector for direct connection to Shure AD1, ADX1, AXT100TA4F, GLXD1, PGXD1, QLXD1, and ULXD1 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Shure Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can this trigger also fire a speedlight with a pocket wizard iii receiver? Didn’t know if it could communicate with the pocket wizard in receiver mode.

A: Unfortunately, this transmitter can only fire Godox X receivers. The Pocket Wizard system would work on a different frequency.

Q: 2. The f stop always shows on the VS-570N and I shoot manual from the camera and manual from the flash using Vello trigger system and the the f stop on the flash never goes away, does the f8 on the flash affect the flash out come?

A: The f/stop displayed on the flash is normal and does not have anything to do with the output as long as you have the flash set to manual not TTL.

Q: 3. This is driving me crazy. With a Sony A6500 how do I use HSS with this unit and a godox ad200?? Both the trigger and the unit say HSS and the camera wont get any usable images above 200 shutter speed....

A: If half of the image is not exposing (is dark ) then you are not achieving HSS if you are over/under exposing you just have to adjust the F-STOP on the camera ( make sure you have Sony trigger )

Q: 4. is this work with GODOX V1s?

A: No.

Q: 5. Can this trigger an Impact Cruizer monolight which is also on 2.4Ghz frequency?

A: This will only trigger receivers using Godox X series receivers. The 2.4Ghz range is a very large area that covers many sub frequencies.

Q: 6. Does this trigger works with all their capabilities with the Sony a6400camera and flash godox tt3500?

A: It will work with a Sony A6400 and a Godox TT350.

Q: 7. If using a Godox X ProN, what settings do you use on your Nikon Speedlight?

A: If you have a Godox X1R-N attached to your Nikon speedlight, it would be best to use in TTL mode.

Q: 8. Will this trigger a Profoto A1x set for TTL?

A: For the Profoto lights you will need a Profoto transmitter for direct and full compatibility.

Q: 9. Will the Godox XProN TTL work with my TT600 flash on a Nikon?

A: Yes it will

Q: 10. Does it have a AF assist beam?? I´ll use it on the A7III

A: Yes it has , the off/on switch in front will help with focus assist