The tan Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 3.5mm locking Connector for Happie Amp or Empower Sound Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Gt200 work with Godox ?

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras would be compatible for use with the Geekoto GT200 Monolight. According to the manufacturer, GEEKOTO, they state to use the GEEKOTO GT200 Monolight with Godox XPRO wireless radio triggers, press and hold both “+” & “-” on the light fixture until the LCD displays a small “A”. If you want the flash to be compatible with GEEKOTO triggers, just press and hold both “+” & “-” until the small “A” disappears on the LCD display.

Q: 2. Work with Samsung NX 30 ?

A: I DO NOT KNOW ANYTHING ABOUT THE SAMSUNG NX 30. I PURCHASED THE KIT TO USE ON SONY A6000. IT WORKS BETTER THAN I HAD HOPED. I CAN MOUNT THE TRIGGER ON THE A6000 AND TRIGGER A NIKON SB700 WITH NO PROBLEMS. I USE THE SB700, BECAUSE IT WILL NOT WORK WITH SOME SONY EXTERNAL FLASHES. I HOPE THIS HELPS.

Q: 3. Will this work with the Olympus FL-700WR Flash since it's radio wireless?

A: Unfortunately no but you can use this Olympus trigger instead. Please take a look at the following link: https://bhpho.to/2E2weEL

Q: 4. I purchased a GODOX xpro. I have a Canon 430EX and a Yuongnuo 600. Do I need to also obtain Godox receivers for each flash?

A: Yes, In order for the echo system to work receivers need to be set in place for the echo system to work. Please review the following item. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R-C https://bhpho.to/2sreE7N

Q: 5. Can we trigger Yn-560-IV using this flash?

A: The YN-560 IV has an optical slave trigger so it can be set to fire when any other flash goes off in the same area. It's slave can be set to ignore pre-flash common when operating YN685 in TTL. But there is no RF communication between the 2 units.

Q: 6. I have this kit plus a few extra receivers. Is there anyway to buy a different Phottix transmitter that supports HSS and use with the 3 Ares receivers I have?

A: Since HSS is a product of the TTL system in the camera which is being used, there is no way for a manual trigger such as the Phottix Ares or the Vello Freewave LR to become HSS ready. The only way to have HSS is to use a Phottix trigger such as the Odin or Odin II. Additionally, the Vello Freewave LR works on a different frequency all together, therefore cannot be triggered by another other brand of radio trigger.

Q: 7. Can I use the Godox Xpro F to trigger a off-camera Godox V860IIN? Will if work with other Nikon flashes?

A: When triggering a Godox flash you can trigger a Nikon or other brand flash and The transmitter will take care of the communication. It only has control of Godox flashes or when using receivers, flashes of the same type as the controller.

Q: 8. Does the trigger work with canon 580EX II flash? Thank you.

A: Directly no, you will need to get the Godox receiver.

Q: 9. Is this unit compatible with Panasonic S1?

A: This unit is compatible with a S1.

Q: 10. Can this Godox XProS trigger Rotolight AEOS II in HSS ? (And if yes; than only with an additional receiver - bypasssing the built-in Elinchrom skyport ?)

A: Not sure. I use it to trigger my Nikon SB700 speedlight along with the x1R receiver.