The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 3-pin Connector for WisyCom Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is the Godox XPro trigger compatible with the ProMaster Pd300 code 9462 studio lighting? I’ve been told by two sources that they are but wasn’t provided information. When received nothing triggers when setup to the proper channels. Please help?

A: No, it is not compatible.

Q: 2. Will this set work with the Sony A7R2 and the flash mecablitz 52AF-1?

A: Unfortunately the metal foot is not compatible with the Sony Multi Interface shoe.

Q: 3. I have a GH5 and am planning on buying Godox SK400II. Is this trigger compatible?

A: Yes they are compatible.

Q: 4. Will this work for the Olympus FL900 and FL600 flashes ???? Jim

A: Unfortunately, Godox does not have an Olympus receiver to provide full program modes. If You used this Godox Nikon receiver, it would only allow Your flash to be activated. Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon B&H # GOX1RN MFR # X1R-N

Q: 5. Does TTL actually work? Before anyone answers, please check because Godox has a bad history with this unit and Sony TTL. TIA

A: I have it for canon and it works perfectly!

Q: 6. Is there a yet a workaround to use a sony or Nissan flash with this trigger and receiver to enable full wireless control?

A: If you have Sony or Nissin flash and you need to use the wirelessly you will need a Godox Receiver Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony BH #GOX1RS

Q: 7. The Godox XPRO TTL wireless flash trigger for Panasonic can it also work on the Leica sl camera?

A: While this trigger can fit a Leica SL camera, there will be no TTL communication.

Q: 8. Hi, I have tried this transmitter on my canon R, the focus assist light does not work, Does anyone know how to activate it? Thank you

A: Unfortunately, due to the sensor design of mirrorless digital cameras, they cannot read infrared light. As such, an AF assist that uses infrared light, such as the Godox XProC TTL Wireless Flash Trigger for Canon Cameras (B&H # GOXPROC), will not work with a mirrorless camera like the Canon EOS R.

Q: 9. I purchased a GODOX xpro. I have a Canon 430EX and a Yuongnuo 600. Do I need to also obtain Godox receivers for each flash?

A: Yes, In order for the echo system to work receivers need to be set in place for the echo system to work. Please review the following item. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R-C https://bhpho.to/2sreE7N

Q: 10. Will this work on a Sony A7III aka Sony ILCE-7m3 provided that you use Godox compatible equipment?

A: Yes it will work with Sony A7III and most Godox lights