The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 3-pin Connector for Zaxcom Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 3-pin connector for direct connection to Zaxcom TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Zaxcom Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I purchased a GODOX xpro. I have a Canon 430EX and a Yuongnuo 600. Do I need to also obtain Godox receivers for each flash?

A: Yes, In order for the echo system to work receivers need to be set in place for the echo system to work. Please review the following item. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R-C https://bhpho.to/2sreE7N

Q: 2. I am planning on buying the canon EOS R. 1st question will this work on that body? 2nd question I currently have a 580exii and two 430 speed lights. Will this remote trigger without any additional equipment? Thanks.

A: Yes , it will work with the EOS R , you will need receivers for both flashes # GOX1RC

Q: 3. Will the Godox Xpro ll flash trigger work with the Nikon Z9?

A: Yes, the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras works with the Nikon Z9.

Q: 4. Will this work on a Sony A7III aka Sony ILCE-7m3 provided that you use Godox compatible equipment?

A: Yes it will work with Sony A7III and most Godox lights

Q: 5. The Godox XPRO TTL wireless flash trigger for Panasonic can it also work on the Leica sl camera?

A: While this trigger can fit a Leica SL camera, there will be no TTL communication.

Q: 6. will this transmitter and receiver work with a Canon 6D?

A: YES! work perfeft

Q: 7. Will it works in iTTL mode with an Nikon SB900 flash ?

A: It can work as long as you have a X1r-N https://bhpho.to/2Xj9N7M.

Q: 8. Would this work with a Canon Speedlite 320ex?

A: so sorry. i am using with with studio mono lights so cannot answer. B&H i would think could answer. Just used them once so far and loved them. good luck.

Q: 9. What is the max Leaf Shutter sync speed?

A: The max sync speed is 1/250s.

Q: 10. I have a GH5 and am planning on buying Godox SK400II. Is this trigger compatible?

A: Yes they are compatible.