The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Senal Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Senal AWS-2000T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Senal Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the max Leaf Shutter sync speed?

A: The max sync speed is 1/250s.

Q: 2. Work with Samsung NX 30 ?

A: I DO NOT KNOW ANYTHING ABOUT THE SAMSUNG NX 30. I PURCHASED THE KIT TO USE ON SONY A6000. IT WORKS BETTER THAN I HAD HOPED. I CAN MOUNT THE TRIGGER ON THE A6000 AND TRIGGER A NIKON SB700 WITH NO PROBLEMS. I USE THE SB700, BECAUSE IT WILL NOT WORK WITH SOME SONY EXTERNAL FLASHES. I HOPE THIS HELPS.

Q: 3. I have a GH5 and am planning on buying Godox SK400II. Is this trigger compatible?

A: Yes they are compatible.

Q: 4. will this transmitter and receiver work with a Canon 6D?

A: YES! work perfeft

Q: 5. Will the Godox Xpro ll flash trigger work with the Nikon Z9?

A: Yes, the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras works with the Nikon Z9.

Q: 6. I purchased a GODOX xpro. I have a Canon 430EX and a Yuongnuo 600. Do I need to also obtain Godox receivers for each flash?

A: Yes, In order for the echo system to work receivers need to be set in place for the echo system to work. Please review the following item. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R-C https://bhpho.to/2sreE7N

Q: 7. Will this work with 860ii flashes?

A: Yes, the XPRO-S trigger will work with Godox flashes such as the VING V860II-S for Sony.

Q: 8. I have this kit plus a few extra receivers. Is there anyway to buy a different Phottix transmitter that supports HSS and use with the 3 Ares receivers I have?

A: Since HSS is a product of the TTL system in the camera which is being used, there is no way for a manual trigger such as the Phottix Ares or the Vello Freewave LR to become HSS ready. The only way to have HSS is to use a Phottix trigger such as the Odin or Odin II. Additionally, the Vello Freewave LR works on a different frequency all together, therefore cannot be triggered by another other brand of radio trigger.

Q: 9. I am planning on buying the canon EOS R. 1st question will this work on that body? 2nd question I currently have a 580exii and two 430 speed lights. Will this remote trigger without any additional equipment? Thanks.

A: Yes , it will work with the EOS R , you will need receivers for both flashes # GOX1RC

Q: 10. Hi recently I bought a flash kit bowens gemini 400r...is it compatible with xpro?

A: No.