The cocoa E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and TA4F Connector for Anchor Audio Wireless Transmitters from Countryman is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the E6i earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Wireless Transmitters    Detachable 2mm Diameter Cable    Headroom for Strong Vocals    Soft, Flexible Boom    Larger Silicone Rubber Earpiece    Includes Windscreen    3 x Omnidirectional Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i has a soft, durable boom designed to be flexed repeatedly to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The flexible boom is easily shaped right on the performer's face. Changeable caps let you shape the frequency response for different situations or to match other microphones.

Easy adjustment keeps the mic in a comfortable position while rejecting unwanted sounds. The E6i omnidirectional earset reduces feedback an average of 12 dB compared to an omnidirectional lavalier.

The included removable, quick-swap cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Work with Samsung NX 30 ?

A: I DO NOT KNOW ANYTHING ABOUT THE SAMSUNG NX 30. I PURCHASED THE KIT TO USE ON SONY A6000. IT WORKS BETTER THAN I HAD HOPED. I CAN MOUNT THE TRIGGER ON THE A6000 AND TRIGGER A NIKON SB700 WITH NO PROBLEMS. I USE THE SB700, BECAUSE IT WILL NOT WORK WITH SOME SONY EXTERNAL FLASHES. I HOPE THIS HELPS.

Q: 2. I am planning on buying the canon EOS R. 1st question will this work on that body? 2nd question I currently have a 580exii and two 430 speed lights. Will this remote trigger without any additional equipment? Thanks.

A: Yes , it will work with the EOS R , you will need receivers for both flashes # GOX1RC

Q: 3. Will the Godox XProS TTL Wireless Flash Trigger for Sony Cameras work with the Sony RX-10 IV? And flash synch up to 1/2000?

A: According to all the specifications the Godox XProS TTL Wireless Flash Trigger for Sony Cameras should work with the Sony RX10 IV with a Godox flash in HSS up to 1/2000. It has not been tested by either company.

Q: 4. Hi!if I buy the V1 Goddox how works your waranty

A: For warranty repair of the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras under the Limited 1-Year B&H Warranty, you may contact the B&H Customer Service Department either by calling 800.221.5743, by e-mailing cs@bhphoto.com, or via Live Chat.

Q: 5. Does TTL actually work? Before anyone answers, please check because Godox has a bad history with this unit and Sony TTL. TIA

A: I have it for canon and it works perfectly!

Q: 6. So this has not fixed the HSS on CANON Mirrorless cameras while used in any of the camera's auto settings?

A: Many have gotten the Godox XProC TTL Wireless Flash Trigger for Canon Cameras to work with CANON Mirrorless cameras while used in any of the camera's auto settings. But some have not and best is to make sure you have the latest firmware on the light and transmitter.

Q: 7. Will it works in iTTL mode with an Nikon SB900 flash ?

A: It can work as long as you have a X1r-N https://bhpho.to/2Xj9N7M.

Q: 8. I purchased a GODOX xpro. I have a Canon 430EX and a Yuongnuo 600. Do I need to also obtain Godox receivers for each flash?

A: Yes, In order for the echo system to work receivers need to be set in place for the echo system to work. Please review the following item. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R-C https://bhpho.to/2sreE7N

Q: 9. Gt200 work with Godox ?

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras would be compatible for use with the Geekoto GT200 Monolight. According to the manufacturer, GEEKOTO, they state to use the GEEKOTO GT200 Monolight with Godox XPRO wireless radio triggers, press and hold both “+” & “-” on the light fixture until the LCD displays a small “A”. If you want the flash to be compatible with GEEKOTO triggers, just press and hold both “+” & “-” until the small “A” disappears on the LCD display.

Q: 10. Would this work with a Canon Speedlite 320ex?

A: so sorry. i am using with with studio mono lights so cannot answer. B&H i would think could answer. Just used them once so far and loved them. good luck.