The cocoa Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Senal Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Senal AWS-2000T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Senal Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. can I control my 603C triggers when this flash is attached to my canon 6D?

A: The flash itself will not control your triggers. It is a receiver only. You can use your 603C triggers just as you do now. But you don't need a separate 603C to fire this strobe, either.

Q: 2. I understand this Sony trigger will work on my Sony A1 to trigger Nikon flashes using the Godox Nikon receivers. Correct? What are the limitations? I assume it will only trigger and I will have to set power, etc manually at each flash. Correct?

A: As long as the Godox XProS TTL Wireless Flash Trigger for Sony Cameras is mounted onto a Sony camera with a Multi-Interface hot shoe, it can communicate with other Godox-branded flashes and wireless radio receivers as long as they are X-wireless compatible and they have been updated with the most recent firmware. If the Godox receivers you use with your Nikon flashes have the most recent firmware, the Godox XProS TTL Wireless Flash Trigger for Sony Cameras will wirelessly trigger your Nikon flashes, and you should be able to use both TTL or manual power settings.

Q: 3. Recently one of my YN685's battery door latch won't hold the door closed. I understand this is a known issue that has occurred for many owners. Is there a solution or does that make a good flash disposable?

A: The Yongnuo Battery Door Replacement for YN-685 and YN-600EX-RT II Speedlites is available on the B&H Website: https://bhpho.to/2JznolS

Q: 4. can this work control the GODOX SK300II MONOLIGHT?

A: Yes, it would be perfect for triggering and controlling the settings of the Godox SK300II.

Q: 5. Will this unit work as a transmitter for canon speedlights?

A: not directly. You would need to attach Godox X1Rc to your Canon units.

Q: 6. Is this compatible with a Nikon D40?

A: While this transmitter is compatible with Nikon DSLRs, it has not been tested with the Nikon D40 to our knowledge. Your results may vary.

Q: 7. Hi planning on running a photo club function for folks not into assisted light using Godox Strobes and Triggers. Question is is the "Nikon" trigger (or any of the others) compatible accross brands that are hot shoe compatible to the extent that they will fire the Godox strobes? For manual use only and not expecting TTL etc.

A: For Godox this would be the safest manual trigger XTR16 https://bhpho.to/2yonmEC. In theory you should be able to shoot any camera in manual with a XPro, but sometimes some combinations of cameras and feet pins do not play nice.

Q: 8. So, I'm using my Canon 580EXII speedlite on a stand with an umbrella, Will it work with just the hot shoe or do I need to plug anything in? I'm asking because my sync cord port on my speedlite is damaged and with cords it misfires.

A: Yes! This can work with just the hot shoe. I am using mine directly from the hot shoe with a range up to 150 feet away.

Q: 9. Can this also trigger Nissin i60a sony?

A: From the manufacturer; XproS could NOT support Nissin i60a sony, pls note.

Q: 10. Does it work with profoto A1

A: This unit will not work with an A1. For an A1 or A1x you will need a Profoto transmitter https://bhpho.to/2W5JbJM.