The cocoa Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 4-Pin Hirose Connector for Azden Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 4-pin Hirose connector for direct connection to Azden UHF 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this Godox trigger work with the Sony A7iv?

A: Yes, the Godox XProS TTL Wireless Flash Trigger for Sony Cameras should be compatible for use with the Sony Alpha a7 IV Mirrorless Digital Camera.

Q: 2. is this work with GODOX V1s?

A: No.

Q: 3. Would this work with a Canon Speedlite 320ex?

A: so sorry. i am using with with studio mono lights so cannot answer. B&H i would think could answer. Just used them once so far and loved them. good luck.

Q: 4. Is this trigger compatible with the godox ving v850ii?

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras BH #GOXPROS can be used with a V850II for manual only control.

Q: 5. Is the light output comparable to the Nikon SB 5000? I have heard some say the the figures are off as far as the brightness of the YN685. I use mine 99% of the time on camera.

A: It is not as bright as th sb5000. I have 4 of them and like what I get out of them.

Q: 6. Will these work with sony a7rii and alienbees b800

A: Yes, they'll work. The 3.5mm to 3.5mm cable that comes with the receiver will link the receiver unit to the AB B800.

Q: 7. So this has not fixed the HSS on CANON Mirrorless cameras while used in any of the camera's auto settings?

A: Many have gotten the Godox XProC TTL Wireless Flash Trigger for Canon Cameras to work with CANON Mirrorless cameras while used in any of the camera's auto settings. But some have not and best is to make sure you have the latest firmware on the light and transmitter.

Q: 8. does anyone know if this will work with the Hasselblad x1d? specifically the Nikon triggers

A: Yes this is compatible with Hasselblad X1D

Q: 9. Can this trigger also fire a speedlight with a pocket wizard iii receiver? Didn’t know if it could communicate with the pocket wizard in receiver mode.

A: Unfortunately, this transmitter can only fire Godox X receivers. The Pocket Wizard system would work on a different frequency.

Q: 10. The f stop always shows on the VS-570N and I shoot manual from the camera and manual from the flash using Vello trigger system and the the f stop on the flash never goes away, does the f8 on the flash affect the flash out come?

A: The f/stop displayed on the flash is normal and does not have anything to do with the output as long as you have the flash set to manual not TTL.