The tan Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Happie Amp or Empower Sound Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Hi recently I bought a flash kit bowens gemini 400r...is it compatible with xpro?

A: No.

Q: 2. Can this Godox XProS trigger Rotolight AEOS II in HSS ? (And if yes; than only with an additional receiver - bypasssing the built-in Elinchrom skyport ?)

A: Not sure. I use it to trigger my Nikon SB700 speedlight along with the x1R receiver.

Q: 3. Does it work with profoto A1

A: This unit will not work with an A1. For an A1 or A1x you will need a Profoto transmitter https://bhpho.to/2W5JbJM.

Q: 4. Whic h receiver do you need to use with a Pentax flash?

A: This transmitter can only trigger Godox flashes like the Godox V1, TT350P, and the AD series flashes. Unfortunately, they do not produce a Pentax compatible receiver separately to use on Pentax brand flashes.

Q: 5. Is this unit compatible with the TT350F flash?

A: Yes, I use it with my 350F and the 685Fworks really well. It's a pleasure to have remote done so easily.

Q: 6. Will this work on a Sony A7III aka Sony ILCE-7m3 provided that you use Godox compatible equipment?

A: Yes it will work with Sony A7III and most Godox lights

Q: 7. Will the Godox XPro work with Canon flashes? Such as the 580 EXII or the 600 EX/EX II

A: In order for the Godox XProC Trigger to fire the Canon 580EX II or the Canon 600EX RT/EX II RT flashes, you would need to attach a Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon, BH # GOX1RC. https://bhpho.to/3kcLQ1h

Q: 8. There are two model Godox flash triggers for Panasonic/Olympus but I see no receivers. If I wanted to trigger a Panasonic flash, is there a receiver that would make this possible?

A: Unfortunately, Godox does not product separate receivers which can be connected to a Panasonic brand flash. They only offer Panasonic compatible transmitters which fire Godox flashes that work with Panasonic cameras.

Q: 9. Will the Godox Xpro ll flash trigger work with the Nikon Z9?

A: Yes, the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras works with the Nikon Z9.

Q: 10. Will the Godox XProS TTL Wireless Flash Trigger for Sony Cameras work with the Sony RX-10 IV? And flash synch up to 1/2000?

A: According to all the specifications the Godox XProS TTL Wireless Flash Trigger for Sony Cameras should work with the Sony RX10 IV with a Godox flash in HSS up to 1/2000. It has not been tested by either company.