The cocoa Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and 2.5mm Waterproof Locking Connector for Lectrosonics Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Work with Samsung NX 30 ?

A: I DO NOT KNOW ANYTHING ABOUT THE SAMSUNG NX 30. I PURCHASED THE KIT TO USE ON SONY A6000. IT WORKS BETTER THAN I HAD HOPED. I CAN MOUNT THE TRIGGER ON THE A6000 AND TRIGGER A NIKON SB700 WITH NO PROBLEMS. I USE THE SB700, BECAUSE IT WILL NOT WORK WITH SOME SONY EXTERNAL FLASHES. I HOPE THIS HELPS.

Q: 2. The Godox XPRO TTL wireless flash trigger for Panasonic can it also work on the Leica sl camera?

A: While this trigger can fit a Leica SL camera, there will be no TTL communication.

Q: 3. Is the light output comparable to the Nikon SB 5000? I have heard some say the the figures are off as far as the brightness of the YN685. I use mine 99% of the time on camera.

A: It is not as bright as th sb5000. I have 4 of them and like what I get out of them.

Q: 4. is this work with GODOX V1s?

A: No.

Q: 5. Will these work with sony a7rii and alienbees b800

A: Yes, they'll work. The 3.5mm to 3.5mm cable that comes with the receiver will link the receiver unit to the AB B800.

Q: 6. I have a Canon 5D Mk III. Will this eliminate the need for the separate transmitter Canon ST E2? Will it talk to my other YN flashes and/or Canon 580EX II?

A: The Yongnuo YN685 Wireless TTL Speedlite is very new and from the information listed the YN685 is not a master/commander. It will not control other off camera flashes and it is only radio wireless and does now work with the IR remote like the Canon ST-E2.Current compatible transmitter units include YN-622C-TX, YN-622C / YN622C IIYN560-TX, YN560IV FlashRF-605, RF-603 IIWith the YN-622C-TX and YN-622C / YN622C II transmitters providing the most functionality, including ETTL, HSS, SCS, Remote Manual Power and Flash Head Zoom Control.

Q: 7. So this has not fixed the HSS on CANON Mirrorless cameras while used in any of the camera's auto settings?

A: Many have gotten the Godox XProC TTL Wireless Flash Trigger for Canon Cameras to work with CANON Mirrorless cameras while used in any of the camera's auto settings. But some have not and best is to make sure you have the latest firmware on the light and transmitter.

Q: 8. Hi. Pentax K3 II works in HSS with Godox XPro P???

A: Yes this transmitter will allow for HSS on the Pentax K3 II.

Q: 9. Is it compatible with Nikon D810?

A: Yes, the Yongnuo YN685 Wireless TTL Speedlite for Nikon Cameras, B&H # YOYN685N, would be compatible for use with the Nikon D810 DSLR camera.

Q: 10. Will this Godox trigger work with the Sony A7iv?

A: Yes, the Godox XProS TTL Wireless Flash Trigger for Sony Cameras should be compatible for use with the Sony Alpha a7 IV Mirrorless Digital Camera.