The cocoa Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and LEMO 4-Pin Connector for Vega Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Vega 77 and 677 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Vega Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. can I control my 603C triggers when this flash is attached to my canon 6D?

A: The flash itself will not control your triggers. It is a receiver only. You can use your 603C triggers just as you do now. But you don't need a separate 603C to fire this strobe, either.

Q: 2. If using a Godox X ProN, what settings do you use on your Nikon Speedlight?

A: If you have a Godox X1R-N attached to your Nikon speedlight, it would be best to use in TTL mode.

Q: 3. Hi. Pentax K3 II works in HSS with Godox XPro P???

A: Yes this transmitter will allow for HSS on the Pentax K3 II.

Q: 4. Would this work with a Canon Speedlite 320ex?

A: so sorry. i am using with with studio mono lights so cannot answer. B&H i would think could answer. Just used them once so far and loved them. good luck.

Q: 5. Will the Yongnuo 685 for Nikon Cameras work with the AC3 Zone Controller for Nikon?

A: muy buen producto, y anda perfectoen mi Nikon D810, lo unico que recalienta cuando se hacen demasiados disparos continuos, no pasa lo mismo con un sb de nikon y los radios tambien funcionan perfectamente

Q: 6. Gt200 work with Godox ?

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras would be compatible for use with the Geekoto GT200 Monolight. According to the manufacturer, GEEKOTO, they state to use the GEEKOTO GT200 Monolight with Godox XPRO wireless radio triggers, press and hold both “+” & “-” on the light fixture until the LCD displays a small “A”. If you want the flash to be compatible with GEEKOTO triggers, just press and hold both “+” & “-” until the small “A” disappears on the LCD display.

Q: 7. The Godox XPRO TTL wireless flash trigger for Panasonic can it also work on the Leica sl camera?

A: While this trigger can fit a Leica SL camera, there will be no TTL communication.

Q: 8. can this work control the GODOX SK300II MONOLIGHT?

A: Yes, it would be perfect for triggering and controlling the settings of the Godox SK300II.

Q: 9. Is it compatible with Nikon D810?

A: Yes, the Yongnuo YN685 Wireless TTL Speedlite for Nikon Cameras, B&H # YOYN685N, would be compatible for use with the Nikon D810 DSLR camera.

Q: 10. I have a Canon 5D Mk III. Will this eliminate the need for the separate transmitter Canon ST E2? Will it talk to my other YN flashes and/or Canon 580EX II?

A: The Yongnuo YN685 Wireless TTL Speedlite is very new and from the information listed the YN685 is not a master/commander. It will not control other off camera flashes and it is only radio wireless and does now work with the IR remote like the Canon ST-E2.Current compatible transmitter units include YN-622C-TX, YN-622C / YN622C IIYN560-TX, YN560IV FlashRF-605, RF-603 IIWith the YN-622C-TX and YN-622C / YN622C II transmitters providing the most functionality, including ETTL, HSS, SCS, Remote Manual Power and Flash Head Zoom Control.