The tan Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 2.5mm Waterproof Locking Connector for Lectrosonics Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is the XPRoO compatible with the Godox AD200 for TTL purposes?

A: As the Godox AD200 TTL Pocket Flash is a TTL flash unit when used with a compatible transmitter (and the Godox XProO TTL Wireless Flash Trigger for Olympus and Panasonic Cameras, B&H # GOXPROO, is an X-Wireless TTL transmitter), yes, the Godox XProO TTL Wireless Flash Trigger for Olympus and Panasonic Cameras would be compatible for use with the Godox AD200 TTL Pocket Flash for wireless TTL purposes.

Q: 2. I have a GH5 and am planning on buying Godox SK400II. Is this trigger compatible?

A: Yes they are compatible.

Q: 3. Will this work on a Sony A7III aka Sony ILCE-7m3 provided that you use Godox compatible equipment?

A: Yes it will work with Sony A7III and most Godox lights

Q: 4. I purchased a GODOX xpro. I have a Canon 430EX and a Yuongnuo 600. Do I need to also obtain Godox receivers for each flash?

A: Yes, In order for the echo system to work receivers need to be set in place for the echo system to work. Please review the following item. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R-C https://bhpho.to/2sreE7N

Q: 5. Will this trigger work with the Godox V1C for canon? I'm shooting on both sony and canon cameras right now

A: Ye,s the Godox Sony transmitter will work the V1 for Canon off camera.

Q: 6. Will it works in iTTL mode with an Nikon SB900 flash ?

A: It can work as long as you have a X1r-N https://bhpho.to/2Xj9N7M.

Q: 7. Is it compatible with Nikon D810?

A: Yes, the Yongnuo YN685 Wireless TTL Speedlite for Nikon Cameras, B&H # YOYN685N, would be compatible for use with the Nikon D810 DSLR camera.

Q: 8. Can this Godox XProS trigger Rotolight AEOS II in HSS ? (And if yes; than only with an additional receiver - bypasssing the built-in Elinchrom skyport ?)

A: Not sure. I use it to trigger my Nikon SB700 speedlight along with the x1R receiver.

Q: 9. Is this trigger compatible with the godox ving v850ii?

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras BH #GOXPROS can be used with a V850II for manual only control.

Q: 10. Will this work with 860ii flashes?

A: Yes, the XPRO-S trigger will work with Godox flashes such as the VING V860II-S for Sony.