The light beige Countryman E6i Directional Earset Mic, Standard Gain with Detachable 1mm Cable and 1/4" Connector for Line 6 Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What are the outer dimensions of the case that holds two SmallRig RC 220B lights?

A: Regarding the SmallRig RC 220B Bi-Color LED Monolight (2-Light Kit), the case that holds the two SmallRig RC 220B lights is 19.5 x 10.5 x 9.5".

Q: 2. Why does the manual say "Do not use at altitudes above 2,000m (6,561 feet)"?

A: It is due to cooling at high temperatures.

Q: 3. Does the Aputure Fresnel 2X shown in the recommended accessories work well with the daylight model, RC 220D?

A: Yes, the Aputure Fresnel 2X Attachment can work with the SmallRig RC 220D Light.

Q: 4. Is it correct that this kit only includes 1 v-mount battery plate?

A: Yes. Based on the product page, SmallRig RC 220B Bi-Color LED Monolight (2-Light Kit) only comes with a single SmallRig V-Mount Battery Plate. It would be best to add on an additional SmallRig V-Mount Battery Plate if you need them to both run on V-Mount batteries.

Q: 5. Are these lights water proof or water resistant or should they only be used in completely dry conditions?

A: The SmallRig RC 220B Bi-Color LED Monolight (2-Light Kit) is not IP rated and should only be used in dry conditions.

Q: 6. Is there a way to display the continued measurements in the 1-Degree Viewfinder Spot using the L-858D-U-U light meter as Sekonic L-758DR Spot meter does?

A: Yes, you can display continued measurements in the 1-Degree Viewfinder Spot on the Sekonic L-858D-U Speedmaster Light Meter Kit with Transmitter Module for Godox.

Q: 7. can the increments for aperture and shutter be set independently? IE can I set 1/2 stop aperture increments then set 1 stop shutter increments?

A: Yes, stop increments for shutter and aperture can be set individually on the Sekonic Speedmaster L-858D-U Light Meter.

Q: 8. am from Asia 7 use PocketWizrd and Elinchrome ; can i also use this L-858D with the Sekonic RT-3PW Transmitter Module (433MHz, CE)?

A: Sekonic L-858D-U Speedmaster Light Meter Kit with Transmitter Module for Elinchrom & Phottix can be used in Asia as long as the triggers are also from the US.

Q: 9. How often should it be calibrated?

A: Sekonic does not list a time frame to have the Sekonic Speedmaster L-858D-U Light Meter calibrated. If you see that the meter is off you need to contact Sekonic on that. Is the USA it is, https://bit.ly/3nSVZiF

Q: 10. Is there any chance of a Godox wireless module being or becoming available? Or a work around for the L-858D? I dying to move off my 478DR. Sadly the pull of Godox wins over the pull of yet another Sekonic meter.

A: Sorry, but there are no plans to incorporate Godox transmitter into Sekonic meters at the present time. However there is always a chance another brand could be added as Elinchrom and Phottix were.