The Countryman E6 Flex Cardioid Microphone combines the springy, form-fitting ear grips of the E6, with the flexible and durable boom of the E6i earset microphone. The E6 Flex provides virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The cardioid pattern effectively minimizes off-axis feedback and noise from nearby monitor speakers, instruments and noisy sources. Flexible microphone positioning is maintained and the included windscreen minimizes the wind noise often associated with cardioid microphones.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is cocoa and the cable terminates to a standard XLR male connector for use in preamps, mixers, etc.

Cable with Standard XLR Connector    Slim Springy Ear Grips of E6    Flexible Boom of E6i    2mm Diameter Duramax Cable    Headroom for General Speaking    Cocoa

A miniature cardioid capsule is mounted to a low-profile, flexible frame. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin.

The included removable, quick-swap cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters. The Duramax 2mm diameter cable provides extra strength, flexibility and durability.

The cardioid polar pattern is effective in minimizing off-axis residual noise from nearby monitor speakers, instruments and loud sources. The flexible boom provides a stiff fit that maintains its shape for single user applications. The E6 Flex is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6 Flex's sensitivity response is optimized to accurately capture general speech without noise and distortion.

The fit of the classic E6 meets the flexibility of the E6i. The front boom is like an E6i, the ear section is like the classic E6, the result is the best fitting easiest to use earset available.

Countryman Earsets are the smallest, lightest, and least visible head-worn microphones. The E6 Flex comes in four skin tones to disappear against the face.

Changeable protective caps let you switch between cardioid and hypercardioid patterns in seconds.

Frequency response is better than 30Hz to 15kHz with smooth off-axis response and >100dB dynamic range. Countryman Earsets sound like world-class, full size performance mics but the performer has complete freedom.

The E6i is exceptionally resistant to makeup, sweat and moisture when used with the supplied protective caps. The skin-colored, almost unbreakable boom resists water, sweat, and makeup and can be bent and re-bent many times to fit different performers. The front boom of the E6 Flex is slightly firmer than the E6i, so it's easily shaped right on the performer's face and smoothes out for a professional look.

The E6 Flex comes in three sensitivities for different speaking or singing styles, with up to 140dB SPL capability.

With other microphones a worn cable requires purchasing a completely new mic. An E6 replacement cable easily replaces it in less than a minute. Quick-connect miniature 1mm or 2mm super-rugged cables are available in four colors for almost any wireless transmitter or phantom mic input providing 3 - 48V.

Related Questions and Answers

Q: 1. Will control Komodo X menu settings through dedicated cable or with wifi / bluetooth?

A: The PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control controls the camera only via Wi-Fi Bluetooth.

Q: 2. Will control Komodo X menu settings through dedicated cable or with wifi / bluetooth?

A: The PORTKEYS BM5 III 5.5" HDMI Touchscreen Monitor with Wired Camera Control works wirelessly only.

Q: 3. Has the BM5 III been tested with the Red Komodo using the included control cables?

A: The PORTKEYS BM5 III 5.5" HDMI Touchscreen Monitor with Wired Camera Control controls the RED Komodo wirelessly only.

Q: 4. Does it support the touch to focus (via a cable) for the FX30??

A: The PORTKEYS BM5 III WR Touchscreen Monitor would support wired control for the Sony FX30. It does have touch single focus. Basically it will focus the lens. It does not support quadrant or advanced location on the screen focus control like the FX30 display. It is you touch the screen and the camera will be triggered to focus the lens on the camera. PORTKEYS USB-C Monitor Control Cable for Cameras with USB-C Port (15.7") BH #POTPCCNTRCBL Detailed info of all the control options offered and cameras supported Image: https://bhpho.to/49c0k6n

Q: 5. Does the sdi loop out have latency?

A: The Portkeys BM5WR loop output should have very low latency. However PORTKEYS does not provide latency specs with their displays.

Q: 6. What cable does one need to power this monitor with a D-tap or two-pin LEMO cable?

A: You need a D-tap to 4 Pin LEMO cable or a L-Series dummy battery to D-tap cable.

Q: 7. Does he comes with power cable or I have to buy one? thank you

A: Yes, the PORTKEYS BM5 III WR 5.5" HDMI Touchscreen Monitor with Camera Control comes with the 4-Pin Aviation to DC Power Cord (16").

Q: 8. What is the L type antenna used for on the monitor?

A: The antenna on the PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control (BH #POBM53WR • MFR #BM5 III WR) is part of its wireless control module, which offers Wi-Fi control for the RED KOMODO and Bluetooth control for BMPCC 6K/6K Pro and 4K cameras.

Q: 9. Does this come with an A/C power cable?

A: The PORTKEYS BM5 III 5.5" HDMI Touchscreen Monitor with Camera Control for RED KOMODO does not include an AC wall adapter. We recommend using - https://bhpho.to/3siBWg8 The Portkeys BM5III WR includes- 1x BM5WR Monitor 1x Power Cord 100cm(4-pin aviation to D-tap) 1x Power Cord 40cm(4-pin aviation to DC) 1x L-Type Antenna 1x LANC Control Cable 40cm 1x Type-C Control Cable 40cm 1x Warm Prompt Card 1xUSB (Manual, 3D LUTs, Firmware Inside)

Q: 10. does this monitor work exclusively with the RED V-Raptor, like could it replace the RED lcd monster that come with the camera?

A: The PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control will work with the V-Raptor for camera control via Wi-Fi. The RED LCD monitor offers a direct connection to the camera and therefore, a more stable and reliable connectivity option for camera control.