The black Countryman E6X Directional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 3-pin Connector for WisyCom Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I found that the TTL function does not work on my Canon EOS R5. (The same setup does work on my EOS 5D mk4) ?

A: Please check the firmware version of your Xpro C by enter the C.Fn menu, then you will see Ver *.* in the top right. Currently the latest firmware of Xpro C is V2.0, please update to the latest firmware. Latest firmware can be download from our official website

Q: 2. Does this trigger work with Canon EOS R6 Mark II with Canon Speedlite EL-5 flash?

A: The Godox XProC TTL Wireless Flash Trigger for Canon Cameras BH #GOXPROC is not directly compatible with an EL-5. You can use a B&H # GOX1RC to make it work with an EL-5.

Q: 3. I see that the XProF TTL Wireless flash trigger has the new USB-C connection. Forgive my ignorance, but if wireless, when would this be used...? Trying to wrap my head around all the changes... I'm working with Fuji XPro 2 and Xe2 cameras. But on those the connection in via hot shoe. I will be buying various Godox flash units. My thinking: may as well wait for the newest, but then again, will the newest work with my equipment? (Trying to keep up with it all!!)

A: It would mainly be used to connect the device to the computer to update the firmware of the trigger itself.

Q: 4. Will this work with canon speedlite? Ea mole: 420 and 580?

A: While you do not list the full name of the Canon flashes you own, if your flashes are E-TTL II compatible flashes, then you may use the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon on the bottom of your flash to trigger the unit with the Godox XProC TTL Wireless Flash Trigger for Canon Cameras listed above. If you own the 580EX/580EXII, or 430EX/430EX II flashes, it should work. If you have the older 420EZ flash, it may not work.

Q: 5. Greetings, regarding the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras. Is this trigger compatible with the Fujifilm EX-F500 Flash?

A: Short answer: no, not for wireless radio triggering.The Godox units all share a proprietary wireless protocol that is different from those employed by the OEM flashes from Fuji, Canon, Nikon, etc.. This unit is really built to act as a trigger for Godox-manufactured speedlights and strobes. (However, Godox uses the same wireless triggering protocol across all of its lights so, from everything I read, this Fuji trigger should happily work to trigger a Nikon Godox TT685N or a Canon Godox TT350C, etc., with full TTL and HSS.)It does have a sync port that can be used to connect (via a sync cable) to off-camera units but it wouldnt support TTL in that mode, and wouldnt offer any advantage over just using the PC sync port thats available on most of the Fuji X-series bodies.Hope that helps!

Q: 6. Can I transmit with the yn685 on the canon 550 to another yn685 as slave?

A: Don't know just got mine, need to read manual to figure it out, sorryFrank

Q: 7. does anyone know if this will work with the Hasselblad x1d? specifically the Nikon triggers

A: Yes this is compatible with Hasselblad X1D

Q: 8. Can the Godox XproN (for Nikon) be mounted on a D850 and control Canon EX-RT 600 flash units? Thanks.

A: Godox's cross-platform support is only compatible when using Godox hot shoe flashes and studio strobes. It would not be compatible for using a Godox XProN TTL Wireless Flash Trigger for Nikon Cameras to trigger a Canon 600EX-RT Speedlite Flash. Godox's wireless radio system is not directly compatible for use with Canon's wireless radio system, and you still would not have cross-platform compatibility using a Godox X System receiver on the bottom of the Canon 600EX-RT Speedlite Flash.

Q: 9. I have canon 80d if i buy 2 yn 685 flashes then which trigger reciver i need to buy?

A: The best solution is to buy the Yongnuo YN685 Wireless TTL Speedlite and Wireless Flash Controller Kit for Canon Cameras plus one additional YN685 (for Canon). The Flash Controller included in the kit does a great job of controlling the pair of YN685s. The YN685 flashes include the radio receivers (built in), so you do NOT need additional YN622 transceivers.

Q: 10. Will the Godox Xpro ll flash trigger work with the Nikon Z9?

A: Yes, the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras works with the Nikon Z9.