The tan Countryman E6X Directional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Amplivox Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this control Profoto lights? Just like the profoto air?

A: It will, if you pair the Profoto light unit (or any other brand flash unit that has a sync port) with another one of these or another Godox remote attached by a sync cord. But, you'll have to manually walk over to the light and adjust your settings. The Godox remote will not manage the output of the light, other than fire it.

Q: 2. I recently purchased a Godox Gemini GS200II 200Ws Monolight, will this unit work on its own with the wireless functions of the light? I'm assuming it would but I want to make sure. Thank you!

A: The XPro transmitter can communicate with the built in receivers in the Godox GS series.

Q: 3. Will this work with canon speedlite? Ea mole: 420 and 580?

A: While you do not list the full name of the Canon flashes you own, if your flashes are E-TTL II compatible flashes, then you may use the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon on the bottom of your flash to trigger the unit with the Godox XProC TTL Wireless Flash Trigger for Canon Cameras listed above. If you own the 580EX/580EXII, or 430EX/430EX II flashes, it should work. If you have the older 420EZ flash, it may not work.

Q: 4. Can this be used on studio lights so that no other external light can trigger them?

A: Yes, it will work.

Q: 5. Does the signal from this work underwater in a waterproof camera/flash housing?

A: I don't use them under water but I don't see why not. They work great! !! :-) good luck!

Q: 6. Will this work on cannon m50

A: This is compatible with a m50.

Q: 7. Is this work with Cannon 60D?

A: Yes, this wireless sync system will work with many brands including Canon. The sync system is not TTL. It will set off the flashes but in manual only.

Q: 8. Can I sync/use two Godox SK400II-V strobes and my Westcott FJ400 via this Trigger? (Sony)

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras cannot speak directly to the radio in the Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug), B&H # WEFJ400S. However, you can use the XProS on-camera to trigger Godox lights (with the trigger in manual mode and the camera set to 1/200th of a second). You would put the FJ400 lights into optical-sync mode and they will fire optically when the Godox lights are triggered by the on-camera XProS.

Q: 9. Is it possible to control the flash out put from the transmitter on the camera?

A: No. You must control flash output from the flash unit.

Q: 10. Is it possible to use the Nikon transmitter on a Nikon camera to work with a Godox V1s, sony flash?

A: As long as you ensure the firmware inside both the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras and the Godox V1 Flash for Sony are updated to their most recent firmware version, yes, you should be able to trigger the off-camera Godox V1 Flash for Sony using the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras mounted to a Nikon camera and still retain full functionality.