The black Countryman E6X Directional Earset Mic, Low Gain with Detachable 2mm Cable and TA4F Connector for CAD Audio Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a TA4F connector for direct connection to CAD Audio WX155A wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits CAD Audio Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will these work using an older Photogenic powerlight 375 with a Canon 7D or a 5Ds camera?

A: The Vello Freewave LR would not be compatible with the older Photogenic Powerlight 375 monolights due to their higher sync voltage.

Q: 2. I cannot get my XPro C to trigger my X1c receiver mounted to a Canon 430EXIII-RT flash. Channel and group confirmed same on both, anyone else run into this?

A: If both the Godox XProC TTL Wireless Flash Trigger for Canon Cameras and the rGodox X1R-C TTL Wireless Flash Trigger Receiver for Canon are set to the same channel and group, the only other recommendation I would have is to make sure both the transmitter and the camera are off, then connect the transmitter to the hot shoe on the camera. Make sure you turn on the TRANSMITTER first, THEN power on the camera. On the speedlite flash, make sure the mode on the speedlite is set to M for Manual Mode, not E-TTL or any other setting. I would also recommend to press the TEST button on the transmitter to ensure the transmitter is communicating with the receiver and firing your flash.

Q: 3. I'd like to use multiple AD200 Pros; will this trigger work to connect those with my Sony a7ii?

A: Yes, the Godox XProS TTL Wireless Flash Trigger for Sony Cameras will work with Sony a7 II Mirrorless Cameras to trigger Godox AD200Pro TTL Pocket Flashes.

Q: 4. Flash trigger for Tt350f

A: Yes, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras works with the Godox TT350F Mini Thinklite TTL Flash for Fujifilm Cameras.

Q: 5. Will this trigger the Godox TT600 and allow remote adjustments to the flash power?

A: Yes it will allow you to adjust the power

Q: 6. what else would I need for my Nissin Di700A to work with this trigger on my Sony a6500?

A: You would need the xpro reciever, click the link below to view; https://www.bhphotovideo.com/c/product/1341963-REG/godox_x1r_s_ttl_remote_controller.html

Q: 7. will the Godox XProO work with the Godox TT685 o flash unit?

A: Yes, the Godox XProO TTL Wireless Flash Trigger for Olympus and Panasonic Cameras works with the Godox TT685O Thinklite TTL Flash for Olympus/Panasonic Cameras.

Q: 8. Will the Godox XProC TTL Wireless Flash Trigger(canon) fire Godox V1-N? I've already purchased two nikon speedlights which I was using on my Nikon camera, but now I have a Canon R5 which I would like to trigger my V1 Speedlights, with full TTL function.

A: Yes, the XProC Trigger can fire a V1 for Nikon, but in manual mode only. You can only have full TTL with a V1 for Canon.

Q: 9. Will this work with my Canon 5d Classic with my Evolv200?

A: The remote will work with your camera. It should work with the the light.

Q: 10. New to triggers.. Will the XPROC transmit to an XTR16 Receiver?

A: The Godox XPRO-C trigger can fire a Godox strobe that is equipped with the XTR16 receiver.