The tan Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 2.5mm locking Connector for Comtek Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 2.5mm locking connector for direct connection to Comtek M-216 and M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Comtek Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with my Nikon D3x?

A: Yes it will work.

Q: 2. Is this the current model for canon?

A: Yes, this trigger is the current model available for the Godox Canon compatible flashes.

Q: 3. Will this work with Impact brand strobes?

A: This transmitter will work only with Godox strobes and dedicated flash units. In order to trigger off your impact strobes please look into the following Impact PowerSync Mini Transmitter and Receiver Kit https://bhpho.to/3sB3Rqb

Q: 4. Can this trigger save flash settings for quick location / look changes like C1, C2, C3 for camera user settings?

A: Unfortunately, flash settings cannot be stored.

Q: 5. I use both canon and Sony and wanted to know if I purchased one trigger, would it work for both cameras using HSS or do I have to purchase two different triggers?

A: You would need to get 2 separate triggers.

Q: 6. will it work on Nikon SB 5000?

A: This is a trigger that goes on the camera's hot shoe, then you will have to attach the Godox receiver to the SB5000. The SB5000 will not communicate with Godox directly, you need the receiver.

Q: 7. Does this work with Godox v1 for Sony? And if so, will it work in bulb mode?

A: It is compatible with the V1. You will have to experiment to see about its compatibility with bulb mode.

Q: 8. hi, which better beamer model uses this flash YN685?

A: The FX3 would be compatible to the YN685. Click the link below to view; https://bhpho.to/3epE8bm

Q: 9. Does the AF assist beam work with Nikon Z cameras? Z cameras use green assist light.

A: The AF assist beam on the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras does not work with mirrorless cameras, including the Nikon Z series cameras.

Q: 10. I have a yongnuo yn 560tx that I use with my 560 iv flashes. can I still use the 560 tx to trigger the 685?

A: Hi, I didn't test that, sorry, but the flash is very good & cheap, Thanks