The CS1708A 8-Port PS/2-USB KVM Switch from ATEN is a control unit that allows access to multiple computers from a single PS/2 or USB console (keyboard, mouse, and monitor). A single switch can control up to eight computers. As many as 31 additional switches can be daisy-chained to each other, so that up to 256 computers can all be controlled from a single keyboard-monitor-mouse console. Additionally, a front panel USB port is available for each computer to access any peripherals connected to it on a one-at-a-time basis. Its dual interface supports computers and console with PS/2 or USB keyboards and mice. This switch requires no software installation and is suitable for convenient computer selection via front panel pushbuttons, hotkeys, and multilingual On-Screen Display (OSD) menus.

Auto PS/2 and USB Interface Detection    Up to 2048 x 1536 Video Quality Support    Two Level Password Security    Daisy-Chain up to 31 Additional Units    Auto Scan Feature    Broadcast Mode    Hot Pluggable    Rack Mountable    Supports Windows, Linux, Mac, and Sun

One USB-PS/2 console controls up to 8 computers

Daisy-chain up to 31 additional units to control up to 256 computers from a single console

Front accessible USB port allows each computer to access USB peripherals *

Dual Interface supports computers and console with PS/2 or USB keyboards and mice

Multiplatform support for Windows, Linux, Mac, and Sun

Video DynaSync stores the console monitor's EDID (Extended Display Identification Data) to optimize display resolution

Supports USB keyboards for PC, Mac, and Sun

Auto PS/2 and USB interface detection

Enhanced video quality of up to 2048 x 1536; DDC2B

No software required for installation convenient computer selection via front panel pushbuttons, hotkeys, and multilingual On-Screen Display (OSD) menus

Auto-senses station's position on daisy-chained installations

No need for manual dip switch setting

Front panel led indicates station's position

Port names automatically reconfigured when station sequence is changed

Two level password security so only authorized users view and control computers

You can setup to four users and an administrator with separate profiles for each

Auto Scan feature for monitoring user-selected computers

With Broadcast mode operation simultaneously performed on all selected computers

You can add or remove computers without having to power down the switch

Buzzer on/off via hotkey and OSD

Firmware upgrades to all chained KVM switch at the same time via the daisy-chain cable

Rack mountable in 19" system rack (1U)

Related Questions and Answers

Q: 1. Can this KVM switch be controlled via http or other network commands? I am looking to integrate this with Companion.

A: The IOGEAR 8-Port USB HDMI KVMP Switch does not have network support.

Q: 2. Would this work with a USB mic between a Mac & a PC?

A: Yes, the ATEN US3342 could be used with a USB microphone, but switching will not be instant as each computer will take a moment to recognize and switch to the new audio device. You will also likely hear a popping sound through your headphones every time you switch. If applications like video games or streaming services are running when the audio device is switched, they may become unresponsive while the computer changes configuration.

Q: 3. Thumderbolt to USB 2.0 hub on my MacBook since I use most of the other ports for power and external monitors. I need a KVM switch for KB/mouse because Universal Control stopped working for me. Will this device work if plugged into the USB 2.0 hub with a thunderbolt to USB 2.0 cable?

A: The ATEN US3310 is not designed for use with Thunderbolt ports or Thunderbolt devices, and may not work as intended in this scenario. It may be possible if connected to Thunderbolt generation 3 or higher, but the switch is designed specifically for USB 3.0/USB 3.1 and is not intended for use with a USB 2.0 host connection.

Q: 4. is this product UL certified?

A: Iogear lists this with FCC, and CE certifications. They do not provide documentation of UL certification.

Q: 5. Can I extend the controller or is it a fixed length?

A: On this IOGEAR 2-Port 4K KVM Switch, the 48" Built-In Cables can not be extended.

Q: 6. Is the IOGEAR 2-Port DisplayPort 1.2 KVM Switch (GCS1932) compatible with two Dell U2413 monitors in series?

A: Yes, this would work with 2 Dell U2413 monitors.

Q: 7. Can i connect 8 Mac Mini to 1 monitor/keyboard/mouse with this or do I need to by additional equipment?

A: Thank you for choosing IOGEAR and we apologize for the inconvenience. We would need to know more about your setup. To better service you and understand your set up, please feel to contact our customer support at 1-866-946-4327 or email us: support@iogear.com. Once again, thank you for choosing IOGEAR.

Q: 8. This equipment brings the eight wires?

A: Two custom KVM Cable Sets are included with your purchase.

Q: 9. can this do 2560x1440 @ 144hz or greater?

A: 60 Hz is listed as the maximum regardless of resolution.

Q: 10. Does this KVM support EDID?

A: No, the IOGEAR 2-Port 4K KVM Switch does not support EDID.