The black Countryman E6i Directional Earset Mic, Low Gain with Detachable 2mm Cable and TA3F Connector for Audix Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a TA3F connector for direct connection to Audix RAD360-BP wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Overview says that the X ProS offers 2nd curtain syn. I don't see it on the transmitter. Does anyone know how to activate 2nd curtain syn on it?

A: You would activate it directly on the camera with the "Rear curtain" function.

Q: 2. Will it be good for a Nikon D-700 FX ??

A: The Bolt VS-570N Wireless TTL Flash for Nikon Cameras is i-TTL compatible and would be fully compatible for use with the Nikon D700 DSLR camera.

Q: 3. work with canon 5d mk4?

A: Yes, the Godox XProC TTL wireless flash trigger will work with the canon protocol system.

Q: 4. Hi I have a sony a7iii, does this work with the sony a7iii, and work with the Godox X1R-S TTL receiver for sony ( to use with my sony flash)??

A: The XPRO S transmitter works with the A7 III to trigger a Sony flash equipped with a Godox X1R-S receiver.

Q: 5. Does Godox xproc ttl triger work for panasonic lumix dc-s1r?

A: The Godox XProC TTL Wireless Flash Trigger for Canon Cameras listed above is not designed for use on the Panasonic Lumix S1R Mirrorless Camera; it is designed for use on Canon cameras that uses Canon's E-TTL II automatic exposure system. The Godox XProO TTL Wireless Flash Trigger for Olympus and Panasonic Cameras, B&H # GOXPROO, would instead be the correct radio transmitter designed for use with the Panasonic Lumix S1R Mirrorless Camera. While you may mount the Godox XProC TTL Wireless Flash Trigger for Canon Cameras on the Panasonic Lumix S1R, the trigger will only work as a fully manual wireless radio trigger as Canon's E-TTL II automatic exposure system does not communicate with Panasonic's TTL system.

Q: 6. Can this trigger work with the godox v860ii Fuji flash when the flash is off camera, ie 2 camera systems, 2 riggers and one flash ??

A: Yes it will work very well

Q: 7. Please this transmitter can shoot the prophetic speed light? With the receiver ? I need it for tomorrow

A: You can only fire flashes with the Godox X series receivers built in or a flash with a Godox receiver attached to it.

Q: 8. Is it possible to use the Nikon transmitter on a Nikon camera to work with a Godox V1s, sony flash?

A: As long as you ensure the firmware inside both the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras and the Godox V1 Flash for Sony are updated to their most recent firmware version, yes, you should be able to trigger the off-camera Godox V1 Flash for Sony using the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras mounted to a Nikon camera and still retain full functionality.

Q: 9. Is it possible to control the flash out put from the transmitter on the camera?

A: No. You must control flash output from the flash unit.

Q: 10. Is this work with Cannon 60D?

A: Yes, this wireless sync system will work with many brands including Canon. The sync system is not TTL. It will set off the flashes but in manual only.