The cocoa Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 4-pin female proprietary Connector for Fender Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 4-pin female proprietary connector for direct connection to Fender Passport wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Fender Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Please this transmitter can shoot the prophetic speed light? With the receiver ? I need it for tomorrow

A: You can only fire flashes with the Godox X series receivers built in or a flash with a Godox receiver attached to it.

Q: 2. Hi is work in canon Flash 470exai

A: Not directly. You would need an X1 receiver.

Q: 3. Does a Radio popper receiver work with this trigger?

A: Hi Luis, A Radio Popper receiver is not compatible with this transmitter.

Q: 4. Should I buy xpros or tt350s? Considering xpros is $69 and tt350S is $85, but 350s is a flash which can also trigger other flashes, would it be more economical to buy a tt350s instead?

A: Yes. unless you plan to bring in another triggering system into the same echo system as Profoto we suggest reviewing the following item so both system will work in same echo system. Godox X2 2.4 GHz TTL Wireless Flash Trigger for Nikon BH #GOX2TN • MFR #X2TN

Q: 5. Do you need a receiver for the Godox TT350s flash to operate with the Godox flash trigger XPro S mounted on a Sony a6500?

A: No you do not , Godox TT350s has build in receiver

Q: 6. Silly question, but will this work with the SB-700 or SB-5000?

A: For any Nikon flash you will need a X1r-N https://bhpho.to/2VTCQfw per flash to use it with a XPro.

Q: 7. Is this work with Cannon 60D?

A: Yes, this wireless sync system will work with many brands including Canon. The sync system is not TTL. It will set off the flashes but in manual only.

Q: 8. Does this work with the Godox Xplor 600 HS TTL Monolight?

A: Yes, this works with the Godox 600.

Q: 9. I currently have the D750 & SB700 and I know that I would need the receiver in order to use the sb700. But I am planning to buy the AD200 and I do not know if I can use this XProN or the X2? I do not need the X2 hot shoe. I am worried about the compatibility because in XProN Godox site they do not mentioned the SB700. Should I get the X2 to be sure? I do like the screen of the XProN but I need to be sure before spending $. Thank you!

A: The XPro will work with a SB700 as long as you have the receiver under the flash. If you do not need the shoe on the transmitter than it is a easier to use option than the X2. Its fully capable of working with the receiver and the AD200.

Q: 10. Is there a minimun distance between XPro transmitter and AD200 or 860 speedlite? I would like to use the flash, transmitter and camera on a flash bracket for wedding photography.

A: In certain instances having the transmitter to close can prevent firing. This would be very rare though. In the situation you describe, there will be no issues.