The light beige Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm locking Connector for Azden Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Silly question, but will this work with the SB-700 or SB-5000?

A: For any Nikon flash you will need a X1r-N https://bhpho.to/2VTCQfw per flash to use it with a XPro.

Q: 2. Hi I have a sony a7iii, does this work with the sony a7iii, and work with the Godox X1R-S TTL receiver for sony ( to use with my sony flash)??

A: The XPRO S transmitter works with the A7 III to trigger a Sony flash equipped with a Godox X1R-S receiver.

Q: 3. Does this meter also meter non radio transmitter flashes?

A: Certainly. You could either use cordless flash mode (light meter waits up to 90 seconds for a pop of flash) or synchro-cord mode (wired light meter to your flash via sync cable). For more info, check out page 73 of the manual here: https://www.bhphotovideo.com/lit_files/474654.pdf

Q: 4. Hi every one! I wish someone could help me to know if this transmitter works on sk400 plus ad100 pro (both Godox). Thanks y'all!

A: Yes. 100% system work with the whole Godox echo system.

Q: 5. Is there a minimun distance between XPro transmitter and AD200 or 860 speedlite? I would like to use the flash, transmitter and camera on a flash bracket for wedding photography.

A: In certain instances having the transmitter to close can prevent firing. This would be very rare though. In the situation you describe, there will be no issues.

Q: 6. Can this trigger work with the godox v860ii Fuji flash when the flash is off camera, ie 2 camera systems, 2 riggers and one flash ??

A: Yes it will work very well

Q: 7. Is this work with Cannon 60D?

A: Yes, this wireless sync system will work with many brands including Canon. The sync system is not TTL. It will set off the flashes but in manual only.

Q: 8. Can this meter measure the LUX of a flash? Many meters only seem to be able to measure LUX of ambient lighting.

A: In Ambient Light Illuminance lux (or foot candle) Mode (Incident light measurement) only.

Q: 9. Does Godox xproc ttl triger work for panasonic lumix dc-s1r?

A: The Godox XProC TTL Wireless Flash Trigger for Canon Cameras listed above is not designed for use on the Panasonic Lumix S1R Mirrorless Camera; it is designed for use on Canon cameras that uses Canon's E-TTL II automatic exposure system. The Godox XProO TTL Wireless Flash Trigger for Olympus and Panasonic Cameras, B&H # GOXPROO, would instead be the correct radio transmitter designed for use with the Panasonic Lumix S1R Mirrorless Camera. While you may mount the Godox XProC TTL Wireless Flash Trigger for Canon Cameras on the Panasonic Lumix S1R, the trigger will only work as a fully manual wireless radio trigger as Canon's E-TTL II automatic exposure system does not communicate with Panasonic's TTL system.

Q: 10. Will this work with the Nikon D850?

A: Yes this unit will work with D850.