The light beige Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 2.5mm locking Connector for Comtek Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 2.5mm locking connector for direct connection to Comtek M-216 and M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can this meter measure the LUX of a flash? Many meters only seem to be able to measure LUX of ambient lighting.

A: In Ambient Light Illuminance lux (or foot candle) Mode (Incident light measurement) only.

Q: 2. Can I fire my V860II F off-camera with this device? Thank you.

A: The XproF is great way to control a V860ii F off camera.

Q: 3. Does it work with the Phottix Odin II system?

A: The L-858D-U RT-EL/PX transmitter module operates on the Stratos II/Ares II protocol, which according to Phottix, does not trigger Odin II receivers*. As of 12/8/2020, there doesn't seem to be a firmware update yet available that might accommodate the Odin II system, or it might be a hardware incompatibility that is causing the restriction. *https://bit.ly/3nbSCRL

Q: 4. Is the Godox XProC compatible with both the Canon EL-1 and the 600EXll-RT speedlights?

A: NO ONLY GODOX LIGHTS!!

Q: 5. Hi every one! I wish someone could help me to know if this transmitter works on sk400 plus ad100 pro (both Godox). Thanks y'all!

A: Yes. 100% system work with the whole Godox echo system.

Q: 6. I have a canon 7d Mark ll amd I already have a flash that is a canon 580 and a Godox AD400pro. Will this flash both at the same time or will I need a receiver for the canon flash? Thank you

A: You will need a Godox X1r-c for the Canon flash. Then they will all work together.

Q: 7. Is it compatible with Canon 5D (original/classic/Mk1)? I know that Nissin brand has compatibility with Canon 5D (original/classic/Mk1)

A: It is compatible.

Q: 8. Will it work with Canon SL3 aka Canon 250D,since camera doesn't have universal pin for third party flashes. I'm asking this question as I happened to read that Godox has a firmware update for the transmitter enabling compatibility with Canon SL3. Regards

A: It will work latest firmware update

Q: 9. It is compatible with my camera Nikon d3400?

A: Yes this remote is compatible with a Nikon D3400.

Q: 10. Can this trigger work with the godox v860ii Fuji flash when the flash is off camera, ie 2 camera systems, 2 riggers and one flash ??

A: Yes it will work very well