The tan Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm locking Connector for Sony Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with a Canon 5D Mark II or do I need to purchase an accessory for it to work?

A: The Vello FreeWave Wireless Remote Shutter Release (Canon Sub-Mini Connection) is not natively designed for use with the Canon EOS 5D Mark II, but can be adapted for use with the camera. If you do not yet own the above remote, then it would be better to simply purchase the Vello FreeWave Wireless Remote Shutter Release for Canon w/3-Pin Connection, B&H # VERWC2, as it comes standard with the necessary 3-Pin Connection Cable needed for use with the Canon EOS 5D Mark II DSLR Camera. If, however, you do already own the remote with the sub-mini connection cable, then you can purchase the Vello FreeWave Camera Release Cable for Canon Cameras with 3-Pin Connection, B&H # VERCCC2, as an accessory to use your current wireless remote system with the Canon EOS 5D Mark II DSLR camera.

Q: 2. Does anyone have experience using the Cactus V6 IIs Transceiver with Sony A1 electronic shutter sync? Any problems?

A: Yes. The following system will work. but we highly recommend the Godox units as the offer a bigger echo system and concurrent firmware updates. please review the following item Godox XProS TTL Wireless Flash Trigger for Sony Cameras BH #GOXPROS • MFR #XPROS https://bhpho.to/2LXqMq4

Q: 3. How can I buy just a 2nd receiver and cable?

A: They are not sold individually.

Q: 4. Will this work with Fujifilm XT10?

A: Yes it works. The first 2.5mm jack they sent was defective. B&H sent new 2.5 mm jack and it worked. The 2.5 jack package doesn't list the Fuji XT10 camera as a camera that works with the jack but it does work. The 2.5 mm jack has to be ordered With th wireless remote.

Q: 5. Will the vallo free wave relace work with Sony NEX-7

A: I do not think it will work; I do not see a place to plug it into the camera. The camera manual mentions a Wireless Remote .

Q: 6. Does the Vello Freewave work with the sony a7lll?

A: Yes this remote is compatible with the Sony A7 III.

Q: 7. Does this have the ability to lock the shutter open?

A: The Vello FreeWave has the ability to shoot in bulb mode, which will have the shutter remain open until you press the trigger again to end the exposure.

Q: 8. Because the receiver uses a dedicated cable to connect to the remote port on the camera, can I assume that the reciever shoe is cold, not hot?

A: Yes, it merely attaches to the hot shoe .

Q: 9. Does it work with Canon 600D? If not which remote suits best for canon 600D?

A: Hi, I used it with Mark 5diii but the recommended cameras are within the details for the product. I would definitely check to be sure or contact B&H for recommendations if it does not work for your model. Good luck!

Q: 10. Does this work with the Nikon D850?

A: You will need the same product with the 10-pin setup.