The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Shure Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA4F connector for direct connection to Shure AD1, ADX1, AXT100TA4F, GLXD1, PGXD1, QLXD1, and ULXD1 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Shure Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can NiMh batteries be used in the Godox XPro N?

A: Rechargeable Ni-MH batteries like the Eneloop can be used with the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras BH #GOXPRON.

Q: 2. Will this trigger a TT685C or does it only work with the Sony version?

A: Yes only works for trigger - if this is a Sony model

Q: 3. Will this work with HVL-F45RM unit?

A: You would need to add this receiver, Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony B&H # GOX1RS MFR # X1R-S But unfortunately, it will Not support TTL or HSS, its only a manual trigger.

Q: 4. would i need a special cable to use this with a pocketwizard?

A: I've never used the pocket wizard so I don't know. But if your pocket wizard has pc sync - then you most likely can use this flash with it via 'a special bable' because it does have a pc sync port on the side. Good luck.

Q: 5. What accessories do I need to connect this speed light to a light stand? For use with and without umbrella.

A: I would recommend the Impact umbrella bracket, please click the link below to view; https://bhpho.to/2cL1nCU

Q: 6. Will this work with a Canon 580ex?

A: No, you would need a flash with a radio signal built in or you can attach a Godox radio receiver to the flash.

Q: 7. Will This Trigger Work With A TT685s

A: Yes, the Godox XPro S can trigger the Godox TT685S.

Q: 8. Will these work with the Canon eos r7s hotshoe? Do I need the adapter ad-e1?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit will work with a Canon R7.

Q: 9. Is it compatible with Canon 5D (original/classic/Mk1)? I know that Nissin brand has compatibility with Canon 5D (original/classic/Mk1)

A: It is compatible.

Q: 10. Will this work with a Canon 1DX mk III? My old Pocket Wizards will not work with the 1DX mk III

A: Yes. The following system will work with canon e-ttl metering system. Depending on whihc pocket wizard being used it could need to be updated with the latest firmware. We suggest contacting manufacture for support.