The cocoa Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and TA3F Connector for Audix Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA3F connector for direct connection to Audix RAD360-BP wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Would this be fully compatible with the Canon eos R7?

A: Yes. With all firmware updates in place both camera and commander yes unit works great reading the TTL protocol system.

Q: 2. Is this flash capable of being a master for the Canon 430 EX II?

A: Yes it is capable of serving as a master for the Canon 430EX II flash. It can also serve as a slave to any other flash within Canons system that serves as a master also.

Q: 3. It it compatible with the FujiFilm EX-F500 flash? If not do I need a receiver to go along with it?

A: Unfortunately, this trigger cannot work with a Fuji EF-X500 flash being that Godox does not produce a receiver for Fuji in their X series triggering system. This trigger is limited to firing the AD200, V860 II F, and the new AD600 Pro monolight for Fuji.

Q: 4. Does this support automatic duplex scanning with the ADF?

A: No, the Epson EcoTank Pro ET-5170 Wireless All-in-One Supertank Printer does not have duplex scanning. For that one would need to move up to the Epson EcoTank Pro ET-5800 All-in-One Cartridge-Free Supertank Printer, BH #EPET5800 (https://bhpho.to/3axYDS6).

Q: 5. Will Godox XProN work on Nikon D3s?

A: According to page 45 of the Godox XProN TTL Wireless Flash Trigger for Nikon Camera's instruction manual, Godox has only tested the Godox XProN TTL Wireless Flash Trigger for Nikon cameras on the more recent Nikon cameras (or cameras they had available). They list the Godox XProN TTL Wireless Flash Trigger has been tested on the following cameras (in order of series): Nikon D3100, D3200, D3300, D5000, D5100, D5200, D5300, D60, D70S, D90, D7000, D7100, D100, D200, D300, D300S, D500, D610, D700, D750, D800, D4, and D5 DSLR cameras. As stated, this table only lists the tested camera models, not all Nikon series cameras. For the compatibility of other camera models, a self-test is recommended. The cameras which are released before 2012 do not have TTL mode in their D and E-group.(Personally, I believe it should be compatible with the Nikon D3s and any camera that supports i-TTL flash communication, and it is possible the unit was only tested on cameras that were readily available. However, do note that the above item does have a 30-Day Return Policy, so if it does not work for your usage needs, you may return the unit for an exchange or refund following the terms and conditions on our Return Policy link on the bottom of our webpage).

Q: 6. Is the Godox XPro-N TTL Wireless Flash Trigger compatible with the NIKON Z6 Mirrorless camera?

A: This transmitter can work on the Nikon Z6.

Q: 7. Do I need to plug the flash in to the receiver or can I just put it on a hotshoe

A: Any way that is convenient. You can put the flash on to the hot shoe if it is that type of flash or if it is a studio type flash you need to use the supplied cord. Remember this is a manual flash not auto so you have to test or use a flash meter

Q: 8. Will this flash work with the Pocket Wizard FlexTT5, MiniTTI and the ACIII controller.

A: Yes they will. As long as the flashes being used with the MiniTTl and FlexTT5 are Canon E-TTL II compatible (which this one is), then the PocketWizards will not be able to know the difference between these and an original Canon flash.

Q: 9. Will the Canon model (XproC) work with Godox flash models made for a Sony such as the Godox TT350S Mini Thinklite? Full TTL, HSS, etc. features?

A: Yes, all Godox flashes are fully compatable to all Godox triggers. You can use a Godox Canon trigger, which is on a Canon camera, & it will 100% compatable to a Godox flash with a Sony or Fuji mount. A Godox trigger must match the camera for full compatability.

Q: 10. Is it compatible with Canon Rebel t5i (700D)?

A: Yes, it's fully compatible with the t5i.