The black Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and LEMO 4-Pin Connector for Beyerdynamic Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS 316, TS 400, and TS 600 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. will this work on the canon r3?

A: it has not been tested but technically the Godox XProC TTL Wireless Flash Trigger for Canon Cameras will work on the Canon R3. But you will need the Canon AD-E1 Multi-Function Shoe Adapter, https://bhpho.to/3sqLfdx .

Q: 2. what does it mean NO PCL POSTSCRIPT support ?

A: If you only type business letters, draw simple graphs, or print photographs, you don't need the power of PostScript. Regular office or home printing does not require PCL or PostScript when using the Epson EcoTank Pro ET-5170 Wireless All-in-One Supertank Printer.

Q: 3. Hi. Which Godox flashes is the Xpro P compatible with? I have the AD600BM and AD360 MK One

A: Being that both the AD600BM and the AD360 have the Godox X series receiver built in, you may trigger them using the XProP transmitter placed on your Pentax camera.

Q: 4. Do I need to plug the flash in to the receiver or can I just put it on a hotshoe

A: Any way that is convenient. You can put the flash on to the hot shoe if it is that type of flash or if it is a studio type flash you need to use the supplied cord. Remember this is a manual flash not auto so you have to test or use a flash meter

Q: 5. Will this flash work with the Pocket Wizard FlexTT5, MiniTTI and the ACIII controller.

A: Yes they will. As long as the flashes being used with the MiniTTl and FlexTT5 are Canon E-TTL II compatible (which this one is), then the PocketWizards will not be able to know the difference between these and an original Canon flash.

Q: 6. does epson 5150 have full feature software win10 win11 ?

A: Yes, the Epson EcoTank Pro ET-5150 Wireless All-in-One Supertank Printer is fully compatible with Windows 10 and Windows 11.

Q: 7. i have D7100 and want to buy YN68 will it work with D7100 CLS system, or should i need YN622 tx ?

A: My understanding is that the D7000 series CLS system uses the popup flash for controlling the external flash. (Popup in Commander mode, external flash in Slave mode) The YN685 is controlled via radio signals, not optical /light/popup-flash. The protocol ( language ) used by the radio signals is Yongnuo-only, so you need a Yongnuo transmitter attached to your 7100 hot shoe. The YN-622N-TX is transmitter only (with LCD for setting flash outputs/ratios and mode), while the YN-622N can act either as a receiver or a transmitter (but lacks the TX's LCD capabilities).

Q: 8. Is the Godox XPro-N TTL Wireless Flash Trigger compatible with the NIKON Z6 Mirrorless camera?

A: This transmitter can work on the Nikon Z6.

Q: 9. Is it compatible with Canon Rebel t5i (700D)?

A: Yes, it's fully compatible with the t5i.

Q: 10. Is this compatible with Sony FA-WRC1M (Wireless commander) A7R X?

A: To trigger this flash from a Sony FA-WRC1M, you would need the Sony FA-WRR1 Wireless Radio Receiver B&H # SOFAWRR1 attached to it.