The black Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and TA4F Connector for Paso Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA4F connector for direct connection to Paso MW223 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Paso Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is it compatible with Canon Rebel t5i (700D)?

A: Yes, it's fully compatible with the t5i.

Q: 2. Currently I can work with nikon sb-910 no top of yn-622 as a master to control other nikon flashes mounted on yn-622 and control from the sb-910 itself on power output of my other nikons. Is it possible to do the smae with the sb-910 as master but instead of nikon flashes to use the new 685n and control their power output from the sb-910?

A: I think this will work for you. As a Canon shooter I use the YN622C controller to independently control other Yongnuo TTL flashes that sit on a YN622 transceiver. However the YN685 is already wireless ready for the YN622 controller (one for Nikon is available). Then from your camera menu you can control other flash configurations adjusting TTL stops or switching to manual or disabling the flash without manually going to the flash to do this. I did not see that the SB-910 is wireless so a YN622 transceiver is required. The YN685 has built-in wireless but for the YN622 for Nikon. Hope this helpfs.

Q: 3. will this work with a Canon T7?

A: Yes, the Godox XProC TTL Wireless Flash Trigger is 100% compatible with canon TTL system.

Q: 4. Is this compatible with Sony FA-WRC1M (Wireless commander) A7R X?

A: To trigger this flash from a Sony FA-WRC1M, you would need the Sony FA-WRR1 Wireless Radio Receiver B&H # SOFAWRR1 attached to it.

Q: 5. what does it mean NO PCL POSTSCRIPT support ?

A: If you only type business letters, draw simple graphs, or print photographs, you don't need the power of PostScript. Regular office or home printing does not require PCL or PostScript when using the Epson EcoTank Pro ET-5170 Wireless All-in-One Supertank Printer.

Q: 6. Hi. Which Godox flashes is the Xpro P compatible with? I have the AD600BM and AD360 MK One

A: Being that both the AD600BM and the AD360 have the Godox X series receiver built in, you may trigger them using the XProP transmitter placed on your Pentax camera.

Q: 7. Will Godox XProN work on Nikon D3s?

A: According to page 45 of the Godox XProN TTL Wireless Flash Trigger for Nikon Camera's instruction manual, Godox has only tested the Godox XProN TTL Wireless Flash Trigger for Nikon cameras on the more recent Nikon cameras (or cameras they had available). They list the Godox XProN TTL Wireless Flash Trigger has been tested on the following cameras (in order of series): Nikon D3100, D3200, D3300, D5000, D5100, D5200, D5300, D60, D70S, D90, D7000, D7100, D100, D200, D300, D300S, D500, D610, D700, D750, D800, D4, and D5 DSLR cameras. As stated, this table only lists the tested camera models, not all Nikon series cameras. For the compatibility of other camera models, a self-test is recommended. The cameras which are released before 2012 do not have TTL mode in their D and E-group.(Personally, I believe it should be compatible with the Nikon D3s and any camera that supports i-TTL flash communication, and it is possible the unit was only tested on cameras that were readily available. However, do note that the above item does have a 30-Day Return Policy, so if it does not work for your usage needs, you may return the unit for an exchange or refund following the terms and conditions on our Return Policy link on the bottom of our webpage).

Q: 8. How does the Wireless TTL Master and Slave work? Is it through the commander mode on the Nikon DSLRs?

A: The Bolt VX-760N can be triggered from a master flash or a commander on top of the camera like a Nikon SU-800 as well as a pop up flash with the commander function, which is found on most current Nikon DSLR bodies.

Q: 9. i have D7100 and want to buy YN68 will it work with D7100 CLS system, or should i need YN622 tx ?

A: My understanding is that the D7000 series CLS system uses the popup flash for controlling the external flash. (Popup in Commander mode, external flash in Slave mode) The YN685 is controlled via radio signals, not optical /light/popup-flash. The protocol ( language ) used by the radio signals is Yongnuo-only, so you need a Yongnuo transmitter attached to your 7100 hot shoe. The YN-622N-TX is transmitter only (with LCD for setting flash outputs/ratios and mode), while the YN-622N can act either as a receiver or a transmitter (but lacks the TX's LCD capabilities).

Q: 10. Can I control multiple (say 3) off camera YN-685s, with just using YN-622C-TX and without requiring all of them on YN-622C receiver?

A: You don't need the YN-622C receiver to control these flashes. They have the radio receivers built into the flash.