The black Countryman E6i Directional Earset Mic, Standard Gain with Detachable 2mm Cable and LEMO 6-pin Connector for Micron Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a LEMO 6-pin connector for direct connection to Micron TX 700-Series wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Micron Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with canon speedlite 550ex?

A: This can work with the Canon 550EX by adding the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC.

Q: 2. will godox XProN work on Nikon z6?

A: The Godox Xpro N will work with a Nikon Z 6.

Q: 3. I have a few older Nikon flashes and I need to know will this work with a Nikon SB28 and SB26 speedlight?

A: I put my flashes on Manual power and take them off of the setting that lets them go into standby.. if they go into standby then you have to fire once to get out of standby and then fire again to trigger the flash.

Q: 4. Is the Godox XPro-O required to get off-camera wireless TTL capability between my Olympus EM-5 II and the Godox TT350-O? Also -- I'm not looking to have a multi off-camera setup... is this overkill?

A: The Godox TT350O, already has the receiver built in to receive the signal from the Trigger. This adapter would be necessary to attach the flash to a lightstand. Impact Umbrella Bracket B&H # IMBSM

Q: 5. Does it work with fujifilm xt200?

A: Yes it will work.

Q: 6. Can i use this trigger with a none TTL sony Godox flash like. TT600S?

A: Yes, you can use this transmitter to fire a non-TTL flash such as the Godox TT600.

Q: 7. Can this be used if not mounted directly to the hot shoe, using some kind of 2.5 mm cable, or perhaps a USB Type-C cable? - Or maybe via a hot shoe sync adapter?

A: Not exactly sure of what you are asking, but if you want to use it off the hot shoe, you will need a flash extension cord that fits into the hot shoe.

Q: 8. Does the XProN Trigger Kit wireless control all features of either the following flashes: Godox TT685N Thinklite TTL Flash, OR Godox VING V860IIN TTL Li-Ion Flash?

A: Yes it controls them in TTL and manual.

Q: 9. This transmitter can work with canon 600EX RT without external Godox receiver?

A: Unfortunately, the receiver inside of the Canon 600EX RT flash cannot be triggered using the XPro C Transmitter without using the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC. Another transmitter than can fire the internal receiver of the Canon 600EX RT is the Phottix Laso TTL Flash Trigger Transmitter for Canon B&H # PH89092.

Q: 10. Do you need this to trigger a Godox V1 off camera?

A: Yes.