The tan Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Sennheiser Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sennheiser SK 2020-D wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sennheiser Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Hi, Is this compatible with both Mamiya RZ67 and Fujifilm GFX?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit may be used on the hot shoe located on the side of the Mamiya RZ 67 or on the hot shoe on top of a Fujifilm GFX camera.

Q: 2. This product is compatible with panasonic GH3?

A: Yes it should work but this product is made to be used as a Remote Shutter; Vello FreeWave Wireless Remote Shutter Release for Canon and Panasonic Kit B&H # VERWC2PK

Q: 3. Does it work with the newer OM1 cameras?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit is compatible with the OM SYSTEM OM-1 Mirrorless Camera.

Q: 4. Is it compatible with Nissin di622?

A: While this trigger could work with the Nissin Di622, it has not been tested to our knowledge. Your results may vary.

Q: 5. Will the LR transmitter trigger the Vello Captain receiver. I realize the flash would have to be on manual?

A: While the Vello Captian's transmitter will trigger the Vello LR's receiver (only when using channels 1-4), the opposite is not true; the Vello LR's transmitter WILL NOT trigger the Vello Captain receiver.

Q: 6. Is this flash compatible with the Nikon WR-R10?

A: This Yongnuo YN685 Wireless TTL Speedlite is made to be compatible with Nikon cameras and their i-TTL system. Though the manufacturer has not guaranteed it, this should be compatible with the Nikon WR-R10 Wireless Remote like any other Nikon flash with its built-in 2.4 GHz Radio Slave System.

Q: 7. Just to clarify, this flash trigger works on a Pentax K1 and other K-series camera?

A: Yes, the XProP Trigger is for Pentax DSLR cameras such as the K1 and others.

Q: 8. Will this flash work with the Pocket Wizard Flex TT5 units for Nikon and let you use both the TTL and manual features on the flash unit and the TT5?

A: Yes, the Bolt VS-570N Wireless TTL Flash for Nikon Cameras should be compatible for use with the PocketWizard FlexTT5. If you wish to set the flash power manually, you would set the output power on the flash itself. If you wish to use i-TTL, you would leave the flash set to i-TTL, and the FlexTT5 would control the flash's output power automatically.

Q: 9. I heard that this trigger do not going down more than 1/128 in output power,and the flash it self ( AD600pro) can go down to 256, is this correct?

A: You have to enable the 256 power on the trigger

Q: 10. Can this flash work on Nikon D3100

A: Yes it will. This flash is compatible with the D3100.