The light beige Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for HME Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA4F connector for direct connection to HME TX550 and TX822 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits HME Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I am using a canon R5 and canon flash do I need to buy a receiver along with the transmitter.

A: Yes you will need a Receiver from Godox

Q: 2. Will the Godox XPro work with Canon flashes? Such as the 580 EXII or the 600 EX/EX II

A: In order for the Godox XProC Trigger to fire the Canon 580EX II or the Canon 600EX RT/EX II RT flashes, you would need to attach a Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon, BH # GOX1RC. https://bhpho.to/3kcLQ1h

Q: 3. can the godox xpron be used to trigger a white lighting studio flash? what receiver would be required?

A: For a White Lighting you can use any of the X1r receivers https://bhpho.to/2VTCQfw.

Q: 4. Does it work in TTL mode (including A:B) with Nikon Z8 and Godox TT685N flashes?

A: Yes, the commander will adapt to all 3 protocol systems for the Nikon Z8 that being control modes Manual, TTL, i-TTL.

Q: 5. what does it mean NO PCL POSTSCRIPT support ?

A: If you only type business letters, draw simple graphs, or print photographs, you don't need the power of PostScript. Regular office or home printing does not require PCL or PostScript when using the Epson EcoTank Pro ET-5170 Wireless All-in-One Supertank Printer.

Q: 6. Can I use some cable to shoot with the Bolt VS-570F flash in TTL mode AND off camera? If yes, do you think the HSS will work too? I appreciate your help! (I own an X-T10 and need to shoot off camera in TTL mode; thank you!)

A: You wouldn't need an off-camera TTL cable to use this flash TTL off camera - this is a wireless TTL flash featuring slave functionality.

Q: 7. Will this trigger a Profoto A1x set for TTL?

A: For the Profoto lights you will need a Profoto transmitter for direct and full compatibility.

Q: 8. Anyone know how to activate 2nd curtain sync on the Godox XPROS for Sony cams? I can't seem to find that feature although it's supposed to have it.

A: Its activated on the camera

Q: 9. Can this trigger an Impact Cruizer monolight which is also on 2.4Ghz frequency?

A: This will only trigger receivers using Godox X series receivers. The 2.4Ghz range is a very large area that covers many sub frequencies.

Q: 10. I see that the XProF TTL Wireless flash trigger has the new USB-C connection. Forgive my ignorance, but if wireless, when would this be used...? Trying to wrap my head around all the changes... I'm working with Fuji XPro 2 and Xe2 cameras. But on those the connection in via hot shoe. I will be buying various Godox flash units. My thinking: may as well wait for the newest, but then again, will the newest work with my equipment? (Trying to keep up with it all!!)

A: It would mainly be used to connect the device to the computer to update the firmware of the trigger itself.